Ram Upgrade Problem
Posted: Sat Feb 21, 2009 11:49 am
Hi,
I have a system that I was going to replace for my main system but one of the suggestions was to try to add Ram to see if that fixed what I was trying to with the computer (which was to play world of warcraft). So I ordered 2 more of the same ram as I had to go up to 4 total gigs of ram.
AMD 64x2 dual core processor 4400
2 gig ram
Asus A8N32-SLI Deluxe motherboard
Nvidia Geforce 7800gt cards
SB Live 24 bit sound
Seagate HD 320 gig 7200
XP Op sys
Is my system and I'm trying to upgrade it to the 4 gigs of ram....problem is, after I put the ram into the empty spots, it only see .75 of it...system goes from 2.0 to 2.75 Ram. I don't know how it only sees 3/4 of 1 stick but that's what it's doing. I tried switching the ram to the opposite spots and it still shows 2.75. I took one stick out and it still shows 2.75, I switched the new stick with the other new stick in the same spot and it still shows 2.75. Took both new sticks out and it shows 2.0 again.
It seems that the motherboard is only seeing 3/4 of one stick and only out of one slot and reading nothing out of the 4th slot. It also seems that both new sticks are good cause it will read the 3/4 off of either stick. Any ideas on what's going on? Do I have to switch something somewhere? I thought it was just plug it in and it will see it.
Any help would be great. Thanks
I have a system that I was going to replace for my main system but one of the suggestions was to try to add Ram to see if that fixed what I was trying to with the computer (which was to play world of warcraft). So I ordered 2 more of the same ram as I had to go up to 4 total gigs of ram.
AMD 64x2 dual core processor 4400
2 gig ram
Asus A8N32-SLI Deluxe motherboard
Nvidia Geforce 7800gt cards
SB Live 24 bit sound
Seagate HD 320 gig 7200
XP Op sys
Is my system and I'm trying to upgrade it to the 4 gigs of ram....problem is, after I put the ram into the empty spots, it only see .75 of it...system goes from 2.0 to 2.75 Ram. I don't know how it only sees 3/4 of 1 stick but that's what it's doing. I tried switching the ram to the opposite spots and it still shows 2.75. I took one stick out and it still shows 2.75, I switched the new stick with the other new stick in the same spot and it still shows 2.75. Took both new sticks out and it shows 2.0 again.
It seems that the motherboard is only seeing 3/4 of one stick and only out of one slot and reading nothing out of the 4th slot. It also seems that both new sticks are good cause it will read the 3/4 off of either stick. Any ideas on what's going on? Do I have to switch something somewhere? I thought it was just plug it in and it will see it.
Any help would be great. Thanks