Legit Reviews

im kind of a noob to memory. so with that off my chest im haveing a major problem.
i have a DFI lanparty nf4 sli-d amd 64 3200.
i cant get any low latency ram to work in this dam board.

i have tried pqi pc3200 400mhz 2-3-2-6 which locks up on every game start up.i have also tried mushkin pc3200 400mhz 2-3-3-7 which carshes with irq_not_lessthan and wont play games.

the only ram that works is high latency ocz which is 3-4-4-8 YUCK!
im sure its bios settings, but i dont know where to start.
i have updated the bios to latest on dif.com

any help would greatly be appreciated!!!!
thanks

What BIOS version are you running?

i believe its 310 dfi's site is down to verify which one it was but im pretty sure it was 310

You'll want the 3-16 BIOS, probably the best ones out there. Head over to DFI Forums - BIOS Factory
http://www.dfi-street.com/forum/forumdisplay.php?f=20

Do a little research based on your memory type and play with some different BIOS'. My personal favorites are the 3-16 BIOS

Mushkin currently test all their Redline Memory using the 5-10 BIOS and has had very good luck with it. I have used BIOS 6-18 and have also had good luck on my DFI SLI-D boards. I believe that 6-18 will be the next official release, so you might want to give it a shot. A list of all the bios's mentioned here with download links are on the Legit Forums on this thread.

thanks everyone for all the replys, i treid 618-2 and im running at 2-3-4-7 with the pqi! but now my ide dvd rom wont work lol. my serial ata dvdr and hd work just fine. im thinkin i may need to try 618-1 or 3. im not sure what the difference between the 3 are though.

I'm guessing that the PQI modules use Samsung TCCD memory IC's... many recent ones do...

Believe it or not the 623-3 BIOS is out now... Might want to give it a shot with Samsung TCCD based modules or stick to the 623-2 BIOS if you have Winbond IC's.