I have ASUS M2N-X Motherboard and Mercury case, and i don't understand how to connect front audio to motherboard. please help !
From Case:
LINE OUT FL | White
LINE OUT RL | Yellow
LINE OUT FR | Red
LINE OUT RR | Blue
MIC IN(R) | Green
GND | Black
MIC POWER (L) | Orange
HELP !!!
M2N-X AAFP
Re: M2N-X AAFP
This page should help you:
http://www.intel.com/support/motherboar ... 015851.htm
I think your connectors are following the AC 97 format.
If you imagine the connector like this....
Pin 10 [XX] 9
_Pin 8 [OX] 7
_Pin 6 [XX] 5
_Pin 4 [XX] 3
_Pin 2 [XX] 1
The the following pins correspond to your headers:
1 MIC = MIC IN(R) | Green
2 AUD_GND = GND | Black
3 MIC_BIAS = MIC POWER (L) | Orange
4 AUD_GND = N/a
5 FP_OUT_R = LINE OUT FR | Red
6 FP_RETURN_R = LINE OUT RR | Blue
7 AUD_5V = N/a
8 KEY No pin = N/a (this is the one without the pin)
9 FP_OUT_L = LINE OUT FL | White
10 FP_RETURN_L = LINE OUT RL | Yellow
Dan
http://www.intel.com/support/motherboar ... 015851.htm
I think your connectors are following the AC 97 format.
If you imagine the connector like this....
Pin 10 [XX] 9
_Pin 8 [OX] 7
_Pin 6 [XX] 5
_Pin 4 [XX] 3
_Pin 2 [XX] 1
The the following pins correspond to your headers:
1 MIC = MIC IN(R) | Green
2 AUD_GND = GND | Black
3 MIC_BIAS = MIC POWER (L) | Orange
4 AUD_GND = N/a
5 FP_OUT_R = LINE OUT FR | Red
6 FP_RETURN_R = LINE OUT RR | Blue
7 AUD_5V = N/a
8 KEY No pin = N/a (this is the one without the pin)
9 FP_OUT_L = LINE OUT FL | White
10 FP_RETURN_L = LINE OUT RL | Yellow
Dan
Re: M2N-X AAFP
DMB2000uk, you was write. i am very thank you !!! it works FINE !! not from first time because in bios was set front audio to High Definition , i just changed it to AC'97. And NOW IT WORKS !!!!!
Thank You Very Much
Thank You Very Much