Need a Chipset Water cooler block for DFI LANParty NF4 SLI

jdragon · Post by **jdragon** » Sun Dec 18, 2005 4:02 pm

I'm having a lot of trouble finding a place that sells a chipset water cooler block for this mobo:

http://www.legitreviews.com/article.php?aid=163&pid=2

Any pointers would really be appreciated!

Post by **FZ1** » Sun Dec 18, 2005 4:29 pm

Check on DFI-street. There is a place in Germany that makes one. If you aren't using SLI you can move your GPU card to the other slot and there are a number of blocks that will work then.

jdragon · Post by **jdragon** » Sun Dec 18, 2005 10:46 pm

I found that german website, but I can't read german and it doesn't tell you how to buy that water block!

Is there a place that sells to the U.S.? This is the last piece in my quest for a quiet gaming machine!

LVCapo · Post by **LVCapo** » Mon Dec 19, 2005 5:24 am

man, I used the very basic Koolance water block and it works awesome. Not to mention its pretty cheap too.

CHC-A05 Motherboard Chipset Cooler
http://www.koolance.com/shop/product_in ... ucts_id=86

GPU-180-V06 Motherboard Chipset Cooler
http://www.koolance.com/shop/product_in ... cts_id=105

Post by **Apoptosis** » Mon Dec 19, 2005 8:40 am

can't go wrong at $22

kenc51 · Post by **kenc51** » Mon Dec 19, 2005 11:08 am

capper5016 wrote:man, I used the very basic Koolance water block and it works awesome. Not to mention its pretty cheap too.

CHC-A05 Motherboard Chipset Cooler
http://www.koolance.com/shop/product_in ... ucts_id=86

GPU-180-V06 Motherboard Chipset Cooler
http://www.koolance.com/shop/product_in ... cts_id=105

how does the cheaper chipset block fit? Is it easy?
I'm debating on what block to go for.....I hopefully have my new expert board by the end of the week ;)

jdragon · Post by **jdragon** » Mon Dec 19, 2005 2:31 pm

Does this waterblock fit the DFI mobo with 2 video cards SLI'ed?

capper5016 wrote:man, I used the very basic Koolance water block and it works awesome. Not to mention its pretty cheap too.

CHC-A05 Motherboard Chipset Cooler
http://www.koolance.com/shop/product_in ... ucts_id=86

GPU-180-V06 Motherboard Chipset Cooler
http://www.koolance.com/shop/product_in ... cts_id=105

LVCapo · Post by **LVCapo** » Mon Dec 19, 2005 3:35 pm

I had no problem with either a pair of 6600GTs or a pair of 6800GTs.......you'll just have to adjust the tube length accordingly