Nforce 680i SLI board replaced the ab9-pro
-
zparker
- Legit Fanatic
- Posts: 174
- Joined: Mon Dec 18, 2006 1:28 pm
- Location: Dubai, United Arab Emirates
my temp listed below is the highest it gets under load. And what is lapping?
EVGA nForce 680i SLI board, XFX GeForce 7950GT@641/1244, Corsair XMS2 2GB DDR2 800 TWIN2X2048-6400C4 (4-4-4-12) 2.1v, Core 2 Duo E6400 (3.0ghz) at 56c max stock cooling, 2 Seagate Barracuda sata 3.0gb 320gb not raid yet and 550watts
old board at 3.2 stock videocard settings / new board at 3.0 oc video card / 3.2 & oc video card
3dmark 2003 score= 22851 / 25262 / 25767
3dmark 2005 score= 10220 / 11764 / not yet
old board at 3.2 stock videocard settings / new board at 3.0 oc video card / 3.2 & oc video card
3dmark 2003 score= 22851 / 25262 / 25767
3dmark 2005 score= 10220 / 11764 / not yet
Lapping = http://www.tweakfactor.com/articles/coolers/lapping/zparker wrote:my temp listed below is the highest it gets under load. And what is lapping?
-
Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
or an article on lapping right here on Legit Reviews that has pictures that works and it actually on an Intel LGA 775 CPU:
http://www.legitreviews.com/article/402/1/
http://www.legitreviews.com/article/402/1/
-
zparker
- Legit Fanatic
- Posts: 174
- Joined: Mon Dec 18, 2006 1:28 pm
- Location: Dubai, United Arab Emirates
OH THE HELL WITH THAT....LOL
EVGA nForce 680i SLI board, XFX GeForce 7950GT@641/1244, Corsair XMS2 2GB DDR2 800 TWIN2X2048-6400C4 (4-4-4-12) 2.1v, Core 2 Duo E6400 (3.0ghz) at 56c max stock cooling, 2 Seagate Barracuda sata 3.0gb 320gb not raid yet and 550watts
old board at 3.2 stock videocard settings / new board at 3.0 oc video card / 3.2 & oc video card
3dmark 2003 score= 22851 / 25262 / 25767
3dmark 2005 score= 10220 / 11764 / not yet
old board at 3.2 stock videocard settings / new board at 3.0 oc video card / 3.2 & oc video card
3dmark 2003 score= 22851 / 25262 / 25767
3dmark 2005 score= 10220 / 11764 / not yet
-
smokin_mitch
- Legit Fanatic
- Posts: 130
- Joined: Thu May 03, 2007 7:22 am
BFG 680i Overclocked E6700
cpu: E6700
Ram: Corsair dominator pc8500c5d
mb: BFG 680i SLI
video: 8800gtx
hd: 2x250gb raid 0
case: thermaltake armor
psu: 550w cooler master
cpu cooler: thermaltake tigtyp 120vx
all voltages auto SLI ram enabled (expert setting)
Cpu thermal conrtol disabled
speedstep disabled
C1E enhanced halt state disabled
spread spectrum disabled
results so far
Ram: Corsair dominator pc8500c5d
mb: BFG 680i SLI
video: 8800gtx
hd: 2x250gb raid 0
case: thermaltake armor
psu: 550w cooler master
cpu cooler: thermaltake tigtyp 120vx
all voltages auto SLI ram enabled (expert setting)
Cpu thermal conrtol disabled
speedstep disabled
C1E enhanced halt state disabled
spread spectrum disabled
results so far
- Attachments
-
- overclock1.JPG (219.52 KiB) Viewed 4533 times
-
smokin_mitch
- Legit Fanatic
- Posts: 130
- Joined: Thu May 03, 2007 7:22 am
C2D temps
your temps seem abit high
my e6700 @ 3.5Ghz sits under 50 gegrees cel all the time and under load only goes upto 54-55 i would swap out the stock cooler for something abit better
im running a thermaltake bigtyp 120vx with my e6700 and BFG 680i board and some corsai pc8500C5D ram
my e6700 @ 3.5Ghz sits under 50 gegrees cel all the time and under load only goes upto 54-55 i would swap out the stock cooler for something abit better
im running a thermaltake bigtyp 120vx with my e6700 and BFG 680i board and some corsai pc8500C5D ram
- Attachments
-
- A Picture is worth a thousand words
- overclock1.JPG (219.52 KiB) Viewed 4524 times
-
smokin_mitch
- Legit Fanatic
- Posts: 130
- Joined: Thu May 03, 2007 7:22 am
Not sure if Ntune is accurate?
My system specs are below, My spp and mcp were at 2500mhz.
No overclocking whats so ever, using air cooling standard on everything , but the cpu has a Zalman CNPS9700LED (Copper) CPU Cooler with artic silver thermal paste.
Scores: 3D Mark 2001se : 58030
3D Mark 2003 : 63027
3D Mark 2005 : 18696
3D Mark 2006 : 13480
Temps : Start (just before running 3d mark) Finish (just after 3d mark)
CPU 38 degrees celcius CPU 40 degrees celcius
Mobo 30 dc Mobo 32 dc
Vid 1 59 dc Vid 1 66 dc
Vid 2 69 dc Vid 2 79 dc
Ntune was giving my memory a red Square for 2.4v, which is what it is rated to run at. I don't think it's very accurate?
No overclocking whats so ever, using air cooling standard on everything , but the cpu has a Zalman CNPS9700LED (Copper) CPU Cooler with artic silver thermal paste.
Scores: 3D Mark 2001se : 58030
3D Mark 2003 : 63027
3D Mark 2005 : 18696
3D Mark 2006 : 13480
Temps : Start (just before running 3d mark) Finish (just after 3d mark)
CPU 38 degrees celcius CPU 40 degrees celcius
Mobo 30 dc Mobo 32 dc
Vid 1 59 dc Vid 1 66 dc
Vid 2 69 dc Vid 2 79 dc
Ntune was giving my memory a red Square for 2.4v, which is what it is rated to run at. I don't think it's very accurate?
Intel X6800. Evga 680i Mobo. 2 x Evga 8800GTX 768mb Superclocked in SLI. Corsair Dominator c3. Enermax 1000watt Psu. Western Digital Raptors x 2. Dell 30" Monitor.Silverstone TJ07 Case. Logitech G7 Mouse and Logitech G15 Gaming Keyboard. Windows XP Professional (32bit).