Page 1 of 1
Latest D975XBX2 Bios and Overclocking
Posted: Sun Jan 27, 2008 9:42 pm
by Johnny_B500
Hey Guys,
Just a quick question. Has anyone had any problems overclocking in the latest Bios revision? I can't seem to get my Q6600 over 2.66 GHZ after updating the bios and installing Vista Ultimate.
Thanks.........!
Re: Latest D975XBX2 Bios and Overclocking
Posted: Mon Jan 28, 2008 12:01 pm
by Johnny_B500
Haha,
No comment I see!
Re: Latest D975XBX2 Bios and Overclocking
Posted: Mon Jan 28, 2008 1:52 pm
by Sparky
No problems here. Still at 3.3ghz with the set up in my signature.
Re: Latest D975XBX2 Bios and Overclocking
Posted: Mon Jan 28, 2008 2:07 pm
by Johnny_B500
Yeah it's weird to say the least. I've just reset the BIOS back to its defaults so I'll try another OC tonight.
Re: Latest D975XBX2 Bios and Overclocking
Posted: Tue Jan 29, 2008 7:36 pm
by seanriddle
Johnny-
No problems here with a QX6700 running Vista Ultimate 64-bit. What's happening when you try to OC? Is the watchdog kicking in, or are you getting the 3 beeps? You may need to power off, unplug the power cord, turn the power back on with the power unplugged to drain power, then move the jumper to maintenance mode, plug the power cord back in, and power on. That works for me, although some people have had to remove the CMOS battery and wait from 5-20 minutes.
Sean
Re: Latest D975XBX2 Bios and Overclocking
Posted: Tue Jan 29, 2008 10:33 pm
by Johnny_B500
Watchdog, C1E and EIST are all off. Anything over 2.66 GHZ and I get a black screen and no boot. It's very weird as I have had 3.2 GHz with ease in the past!
Re: Latest D975XBX2 Bios and Overclocking
Posted: Wed Jan 30, 2008 1:56 pm
by seanriddle
I know 4 sticks worked for you before, but have you tried dropping to just one or two sticks of RAM since this problem started to see if that helps? Have you tried reverting to the older BIOS to see if that helps?
Sean
Re: Latest D975XBX2 Bios and Overclocking
Posted: Wed Jan 30, 2008 8:48 pm
by Johnny_B500
No I haven't done either as of yet. Dropping 2 sticks is an idea I was going to try however the BIOS is a diff story as I have no clue what I was running before as it was the stock BIOS with the board. I kicked myself as it was updating for not writing it down.
Anyway I'll keep you posted how I get on as I couldn't even boot on 1:1 timings last night!
John
Re: Latest D975XBX2 Bios and Overclocking
Posted: Thu Jan 31, 2008 11:09 am
by seanriddle
John-
That doesn't sound good. If you aren't seeing any BIOS text at all, then I guess it must be a CPU speed / RAM timing issue. If you were having drive problems you'd at least see some of the BIOS messages before the hang. Good luck- I know what a pain it can be to troubleshoot these issues if you don't have extra motherboards, CPUs, RAM lying around to swap.
Sean
Re: Latest D975XBX2 Bios and Overclocking
Posted: Thu Jan 31, 2008 8:41 pm
by Johnny_B500
Oh no I can see the BIOS fine just when I try to go over 2.66 GHz or try and boot on 1:1 timings I get a bad boot (black screen) which I can easily recover from by changing the jumper position or sometimes by a full power down/unplug.