Please help newbie do P3 upgrade for MEB-VM

Discussion about Intel CPU Motherboards
Post Reply
unckybob
Legit Little One
Legit Little One
Posts: 3
Joined: Fri Sep 12, 2008 11:28 am

Please help newbie do P3 upgrade for MEB-VM

Post by unckybob » Fri Sep 12, 2008 1:07 pm

Here's a short question from a newbie that is relatively quick to pick up on things. Please take a look at it and leave me a note if you can.

Presently running this system:

HP Pavilion 4550Z with
MEB-VM motherboard (sometimes referred to as an Asus or sometimes Falcon)
HP Part Number: 5184-2705
Celeron (Mendocino) 466MHz 128k Cache
440/ZX rev. 03 chipset
Phoenix BIOS 4.0 Release 6.0.D
Rev. 1.10 6/25/99

Want to upgrade to P3. I already have a particular P3:

Pentium III (Coppermine) 1000MHz (will fit the PGA370 socket on the board)
256k Cache, SL4C8

You may search for the User Manual for the Asus MEB-VM. You may find it here:

http://www.motherboards.org/files/manua ... vm-101.pdf
(This isn't it. This mobo is has the 440/BX chipset. My board has the 440/ZX.)

Can I just put the processor in the board and fire it up, or will that potentially fry something?

If I can't upgrade to the above P3, I'm wondering what is the fastest P3 I can put in it?
I've done just as much homework on this as I can dig up being a newbie and all. I'm wondering if someone out there with a little more experience can help out. Please help.

User avatar
martini161
Mr Awesome
Mr Awesome
Posts: 3183
Joined: Sat Sep 08, 2007 8:27 pm
Location: Cherry Hill, New Jersey
Contact:

Re: Please help newbie do P3 upgrade for MEB-VM

Post by martini161 » Fri Sep 12, 2008 1:28 pm

if you seat the procesor correctly and put on the heatsink you should be fine. no personal experiences with p3's though

unckybob
Legit Little One
Legit Little One
Posts: 3
Joined: Fri Sep 12, 2008 11:28 am

Re: Please help newbie do P3 upgrade for MEB-VM

Post by unckybob » Fri Sep 12, 2008 2:02 pm

I heard that it will work with a 733MHz P3. Is making the change going to be worthwhile?

User avatar
martini161
Mr Awesome
Mr Awesome
Posts: 3183
Joined: Sat Sep 08, 2007 8:27 pm
Location: Cherry Hill, New Jersey
Contact:

Re: Please help newbie do P3 upgrade for MEB-VM

Post by martini161 » Fri Sep 12, 2008 3:47 pm

if it were me personally i would stop putting money into that rig and start saving for a new one. for 5 or 6 hundred dollars you can build a pc that can blow that thing out of the water in every way imaginable

User avatar
Methious
Legit Extremist
Legit Extremist
Posts: 893
Joined: Thu Oct 18, 2007 9:39 am
Location: Joplin Mo.

Re: Please help newbie do P3 upgrade for MEB-VM

Post by Methious » Fri Sep 12, 2008 9:30 pm

I'd stop tossing money at it. For a couple of hundred you can throw in a P35 board and an E-2180 with a decent set of ram and it'd put that rig in the dirt.
Image

User avatar
stopthekilling77
Legit Extremist
Legit Extremist
Posts: 2188
Joined: Fri Feb 02, 2007 2:08 pm
Location: Colorado, USA

Re: Please help newbie do P3 upgrade for MEB-VM

Post by stopthekilling77 » Sat Sep 13, 2008 12:14 am

Methious wrote:I'd stop tossing money at it. For a couple of hundred you can throw in a P35 board and an E-2180 with a decent set of ram and it'd put that rig in the dirt.
Agreed. if youre going to spend money on this machine, the most bang for your buck will be in replacing your motherboard, ram, and CPU. if you went with a basic board youre looking at $50, ram $35-40 for a 2Gb kit, and that E2180 dual core pentium would run just $70. for ~$155 or more you would see a REAL "worthwhile" change.

thats just my 2 cents though :)
Cyberpower special rig
ASUS Prime 450M-A
Ryzen 5 3600 stock
CM Hyper 212 EVO push/pull
24GB DDR4 3000 (soon to be 32GB)
AMD RX 580 8GB
Samsung 970 EVO Plus 500GB NVMe SSD
Lexar 256GB SSD
6GB Seagate hdd
Stock PSU (will upgrade)
ASUS VE278 27" monitor, Samsung Vizio V435-G0 42" 4K TV
Logitech Z533 2.1 Speakers, G935 7.1 headset
MS LXM-00001 Ergonomic kbd
Razer Deathadder Elite, XBOX One wireless controller

I've come a long way from that original Core2Duo build y'all! :supz:

unckybob
Legit Little One
Legit Little One
Posts: 3
Joined: Fri Sep 12, 2008 11:28 am

Re: Please help newbie do P3 upgrade for MEB-VM

Post by unckybob » Sat Sep 13, 2008 6:51 am

Thanks for all the advice. I've got 3 computers. I just installed Ubuntu on this one and my fastest machine. Whenever I try something new I like to do it to this one first. If something goes wrong, I'll just reinstall the operating system. But I'm afraid to do anything to my fast machine, because I risk losing data, or not being able to undo something. I can get a P3 700/256/100 for around $12. I don't mind spending a little money even if would only make the thing twice as fast. It takes about 2:45 minutes to start up. I timed one operation on both. The fast machine took 6 seconds the slow one 45. All the same, I like having a cheapo machine to experiment on. I really am enthusiastic about Linux, but I'm still just a newbie and I often find myself making mistakes, or just trying something that is potentially dangerous.

Post Reply