Legit Reviews

September 03, 2008
- BX97520J.86A.2838.2008.0903.1859

SATA RAID info:
- Intel(R) RAID for SATA - v5.6.2.1002
- Marvell 88SE6145 SATA BIOS – v1.1.0.34
- PXE UNDI: Initializing Intel Boot Agent GE v1.2.28
- PXE Base Code: Intel Boot Agent GE PXE-2.1 build 085

New Fixes/Features:
- Added workaround to remove "-" at the back of the Processor Temperature Margin value in Hardware Monitoring.
- Fixed system hang while language is not selected after language list message pop-out.
- Fixed issue where Language selection and language display mismatch after press Ctrl+Alt+Del.
- Added workaround to fix language option not showing correctly.
- Fixed issue where the change in BIOS language does not take place cleanly.
- Fixed issue where user loses control of setup browser if the setup page shows only text.
- Fixed an issue where pressing ESC key and answering NO will cause the highlight for the selected option to disappear.
- Fixed issue where language selection and language display are not matched after user pressed F9/loaded default in BIOS setup.

http://downloadmirror.intel.com/16896/eng/BX2838P.ISO

http://downloadmirror.intel.com/16896/e ... eNotes.pdf

Just flashed mine and it appears to be ok.

yep, works.

I tried flashing the BIOS, isng the iflash option. I never get the .bat file mentioned in the
instructions.
I proceeded to do the recovery, booting in a floppy and
loading only the .BIO file in the diskette and also tried in a cd.I can
see the LED light in the diskette/ or cd, but nothing comes in the
screen, apparently the process never starts. no change is registered.

Herman

field123 wrote:I tried flashing the BIOS, isng the iflash option. I never get the .bat file mentioned in the
instructions.
I proceeded to do the recovery, booting in a floppy and
loading only the .BIO file in the diskette and also tried in a cd.I can
see the LED light in the diskette/ or cd, but nothing comes in the
screen, apparently the process never starts. no change is registered.

Herman

Did you buy your board less than a year ago?

You might be able to get it replaced through a RMA.

If it was more than a year ago you have two options, find another working PC with the same BIOS chip and hotflash the broken one, or purchase a new BIOS chip pre-programmed with the correct BIOS for your board.

Dan