Help needed - Intel Motherboard

kylerickards · Post by **kylerickards** » Mon Oct 12, 2009 11:24 am

Hi all

Have just acquired a motherboard which after some net research is listed as a WS440BX. However, any pinouts I find for this machine only have a front panel 27 pin diagram. This one is two rows of 8 with second one in on bottom row missing like this:

xxxxxxxxx
x xxxxxx

I cannot find out how to connect the front panel pins, can anyone help?

Thanks
Kyle

bubba · Post by **bubba** » Mon Oct 12, 2009 3:36 pm

Well the manual I found has the pinouts for 2 rows of nine

http://www.tcct.zaq.ne.jp/hiropon/70258701.pdf

Pages 45 and 46

kylerickards · Post by **kylerickards** » Mon Oct 12, 2009 3:44 pm

Hi Bubba

Thanks for that, mine has two rows of 8 though....?

Kyle

Sparky · Post by **Sparky** » Mon Oct 12, 2009 3:49 pm

I too searched for info on this particular mobo to no avail. From what I was able to find it's an older (1998) P3 board that may have been popular with Gateway. If yours is in fact out of a Gateway, have you tried Gateway for support on the pins?

kylerickards · Post by **kylerickards** » Mon Oct 12, 2009 4:12 pm

Thanks for that, will give it a go before I fling it against the wall

DL126 · Post by **DL126** » Wed Oct 14, 2009 5:45 am

http://www.cc-solutions.com/tech/ws440bx.html

Legit Reviews

Help needed - Intel Motherboard

Help needed - Intel Motherboard

Re: Help needed - Intel Motherboard

Re: Help needed - Intel Motherboard

Re: Help needed - Intel Motherboard

Re: Help needed - Intel Motherboard

Re: Help needed - Intel Motherboard