Built new system.
Successfully overclocked 2600k to 4.7 Ghz using turbo (drops to 1.6 Ghz in idle.)
Auto voltage way to high, 1.5+v (around 1v at idle)
Easily OC's to 4.7 Ghz at 1.4 volts, but would like to limit the Auto Volt to 1.4v so that the idle voltage drops too.
Is there any setting to limit the Auto Voltage?
Gigabyte z77-d3h overclocking
Gigabyte z77-d3h overclocking
ga-z77-dh3 (great & cheap O/C'er from Gigabyte)
i2600k/16 gigs Kingson 1600 (OC'ed to 4.5Ghz)
CoolerMaster Hyper 212 + (lapped, smok'in deal, 38C idle, 65C loaded)
MSI GTX 660ti Power Edition
Antec 900 case (quiet)
i2600k/16 gigs Kingson 1600 (OC'ed to 4.5Ghz)
CoolerMaster Hyper 212 + (lapped, smok'in deal, 38C idle, 65C loaded)
MSI GTX 660ti Power Edition
Antec 900 case (quiet)
-
- Legit Extremist
- Posts: 605
- Joined: Mon Jan 31, 2011 11:51 am
Re: Gigabyte z77-d3h overclocking
auto will volt the CPU as it sees it needs it, best choice is to manually set the voltages
Mini ME
Is in a state of flux....
Is in a state of flux....