Still Rocking The i7 2600k
- DJ Tucker
- Legit Extremist
- Posts: 1502
- Joined: Tue Dec 30, 2008 11:52 am
- Location: Hardbase Headquaters
- Contact:
Still Rocking The i7 2600k
Happy new year everyone, It's been a while since I posted last. so I have had this cpu for 2 years and got it second hand from ebay. The seller claimed it had been at stock with stock fan for 5 years and never gone above 60c. So now I have the 2600k running at 5ghz HT on @1.416v (1.404v full load) with a temp of 66c and had no degrading from what I can see. I was running 4.8ghz for 1.38v (1.368v full load) with a temp of 62c. do you guys think 66c (72c in the summer) at 5ghz for 1.416v would be good for another year at least?
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Re: Still Rocking The i7 2600k
My rule was below 60C if possible but not above 70C. I haven't overclocked in a while just because I don't have a reason to.
That processor could run a day or 10 years, there is no way to know.
I am taking it those temps are at full load. Maybe turn up your cooling solution in the summer a bit if it starts to creep past 72C but I would not be too worried as I read the max on that chip is like 98C but people report problems with glitches/performance/crashes/etc once you get into the mid-high 70's.
That processor could run a day or 10 years, there is no way to know.
I am taking it those temps are at full load. Maybe turn up your cooling solution in the summer a bit if it starts to creep past 72C but I would not be too worried as I read the max on that chip is like 98C but people report problems with glitches/performance/crashes/etc once you get into the mid-high 70's.
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me ![Gives thy a finger :finga:](./images/smilies/icon_fU.gif)
![Gives thy a finger :finga:](./images/smilies/icon_fU.gif)
Re: Still Rocking The i7 2600k
Make sure the VRM's are not overheating. They can also heat up the MOBO around them and transfer more heat to the CPU, so if you lower the VRM's temps the CPU heat will also more likely be lower. I would also not go above 60C.
I still have the 2500K @ 4.5Ghz and am happy with the performance. I used to upgrade every 2 years but said no when retarded Intel quit soldering the HSF to the die, making cooling of OC'd CPU's almost impossible.
I still have the 2500K @ 4.5Ghz and am happy with the performance. I used to upgrade every 2 years but said no when retarded Intel quit soldering the HSF to the die, making cooling of OC'd CPU's almost impossible.
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte B550 Aorus Elite, Ryzen 5800X @ stock, 32GB Patriot Viper DDR4 3200Mhz 16-18-18-36-1T, AMD RX 5700XT + AlphaCool WC, ACER Nitro XV2 27", SP 1TB nvme PCiE GEN3, Samsung 2TB; Cooler Master MW Gold 650W, Win10 Pro 64
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
- DJ Tucker
- Legit Extremist
- Posts: 1502
- Joined: Tue Dec 30, 2008 11:52 am
- Location: Hardbase Headquaters
- Contact:
Re: Still Rocking The i7 2600k
Currently my res/pump are at full speed 4000rpm and my rad fan ML Pro 120 are at 2000rpm until they hit 50c then jump up slowly to 2400rpm. Will be linking my res/pump to pwm so I sit at 3000rpm until 50c then slowly ramp up to 4000rpm.
the reason I ended up getting the sandy instead of another ivy, after my last one started to fail on me and overclock could barely reach 4ghz, is due to the better cooling thanks to the solder instead of the paste and the price of a 2600k was £100 where as a 3570k was £130 and the i7 3770K was £175. worth it upgrade from my 3570k.
So I'm at 4.6ghz at 1.296v as the only game I have that puts a nice load on my cpu @ 5Ghz is ARK. hitting 75% per thread load in heavy dino areas. Now getting 90% in same areas. but sitting happy most the time at 50%. Getting 56c full load and probs about 62c in the summer. happy with that until my cpu needs to be clock higher![Very Happy :)](./images/smilies/icon_biggrin.gif)
the reason I ended up getting the sandy instead of another ivy, after my last one started to fail on me and overclock could barely reach 4ghz, is due to the better cooling thanks to the solder instead of the paste and the price of a 2600k was £100 where as a 3570k was £130 and the i7 3770K was £175. worth it upgrade from my 3570k.
So I'm at 4.6ghz at 1.296v as the only game I have that puts a nice load on my cpu @ 5Ghz is ARK. hitting 75% per thread load in heavy dino areas. Now getting 90% in same areas. but sitting happy most the time at 50%. Getting 56c full load and probs about 62c in the summer. happy with that until my cpu needs to be clock higher
![Very Happy :)](./images/smilies/icon_biggrin.gif)
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Re: Still Rocking The i7 2600k
Those are very good temps for an AMD chip as they have a history of high temps with their processors. I used to have fx 8350 and I burnt it just by going 300mhz.