New system
New system
Hi all
Would these me compatible/ ok for my new system ? ?
Asus P5N32 SLi Deluxe nForce4 SLi X16 (Socket 775) PCI-Express Motherboard
OCZ 2GB (2 x 1GB) PC5300 Dual Channel Gold GX XTC Series EL-DDR2 (OCZ26672048ELGEGXT-K)
XFX GeForce 7900 GT XXX Edition 256MB GDDR3 TV-Out/Dual DVI (PCI-Express) - Retail (PVT71G-UDDR/UCP7)
Intel Pentium 4 640 "LGA775 Prescott" 3.2GHz (800FSB) with HT Technology
Akasa Ultra Quiet 460W Paxpower Active PFC ATX2.0 PSU - Black Nickel with Blue LED Fan
Then in about 6 months time a second grapchics cars and a new psu for sli, as i already have the psu and Cpu
Give me your thoughts please good or bad
Thanks Guys
Regards Andy
Would these me compatible/ ok for my new system ? ?
Asus P5N32 SLi Deluxe nForce4 SLi X16 (Socket 775) PCI-Express Motherboard
OCZ 2GB (2 x 1GB) PC5300 Dual Channel Gold GX XTC Series EL-DDR2 (OCZ26672048ELGEGXT-K)
XFX GeForce 7900 GT XXX Edition 256MB GDDR3 TV-Out/Dual DVI (PCI-Express) - Retail (PVT71G-UDDR/UCP7)
Intel Pentium 4 640 "LGA775 Prescott" 3.2GHz (800FSB) with HT Technology
Akasa Ultra Quiet 460W Paxpower Active PFC ATX2.0 PSU - Black Nickel with Blue LED Fan
Then in about 6 months time a second grapchics cars and a new psu for sli, as i already have the psu and Cpu
Give me your thoughts please good or bad
Thanks Guys
Regards Andy
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
you could get this psu
500W Silverstone SST-ST50EF dual +12V, dual PCI-E, ATX12V 2.2, Efficiency>80%
What's your budget for the PSU? Also your in the UK right???
The board does switch automatically to a lower fsb.....the ddr667 is for the EE chip as it's has a 1066MHz FSB. BUT your ram is guaranteed for 667MHz so if you overclock the ram shouldn't be much of a problem, and if you don't overclcok you can run low latencies ;)
500W Silverstone SST-ST50EF dual +12V, dual PCI-E, ATX12V 2.2, Efficiency>80%
What's your budget for the PSU? Also your in the UK right???
The board does switch automatically to a lower fsb.....the ddr667 is for the EE chip as it's has a 1066MHz FSB. BUT your ram is guaranteed for 667MHz so if you overclock the ram shouldn't be much of a problem, and if you don't overclcok you can run low latencies ;)
- infinitevalence
- Legit Extremist
- Posts: 2841
- Joined: Sat Apr 24, 2004 12:40 pm
- Location: Nashville, TN
- Contact:
Get a Pentium D 805. Cheaper, dual core, UBER overclocker.
Check out http://www.tomshardware.com/2006/05/10/ ... ghz_cores/ for some info.
Check out http://www.tomshardware.com/2006/05/10/ ... ghz_cores/ for some info.