Page 1 of 1

D975XBX Badaxe - 1441 bios = working 2:3 divider

Posted: Tue Nov 07, 2006 1:42 am
by eva2000
I updated to 1441 bios i lost some max 1:1 and 4:5 oc'ing stability versus 1334/1304 bios but i gained alot on 2:3 divider.. before 1441 bios, 2:3 only booted up at 266fsb stock, even 1% higher fsb at 2:3 resulted in no boot on 1067fsb strap.

But now with 1441 bios i'm booting up and memtesting on 1067fsb strap so far at 320fsb 2:3 480mhz memory clocks... that's a huge improvement over 266fsb stock 2:3 only bootable :)

I updated to 1441 so to be safe i can drop in kentsfield cpu without issues :)

Final result single 32M @528mhz 4-4-4-8 at 2.36v vdimm with 2:3 divider :)



Before, on 1334 bios best mem clock for this set of memory on D975XBX was 519mhz 4-4-4-12 at 2.36v vdimm on 4:5 divider. On P5W DH same set of memory did 533mhz 4-4-4-8 at 2.4v vdimm

To compare same E6700 on P5W DH 2:3 divider but with 525mhz 4-4-3-8 at 2.52v vdimm


Ran timings a bit tighter @528mhz 4-4-4-4 at 2.39v vdimm

Intel D975XBX rev304 1441 bios
74GB Raptor 8mb

2x1GB Gskill PC6400PHU2 HZ Micron D9GMH 0629 batch



Dual 32M

1441 bios has improved 2:3 overclocking tremendously

vdimm pencil modded

:mrgreen: 8)

Posted: Tue Nov 07, 2006 7:06 am
by DMB2000uk
pencil mods ftw!

Some good numbers there eva. (as always!)