is the newest bios 2674 any good

Discussion about Intel CPU Motherboards
Post Reply
stevethetileguy
Legit User
Legit User
Posts: 20
Joined: Sat Mar 24, 2007 10:33 pm
Location: b.c

is the newest bios 2674 any good

Post by stevethetileguy »

is this newest bios good for xp or just vista ?
User avatar
dicecca112
Site Admin
Site Admin
Posts: 5014
Joined: Mon Mar 01, 2004 10:40 am
Contact:

Post by dicecca112 »

bios are OS independent
Image
stevethetileguy
Legit User
Legit User
Posts: 20
Joined: Sat Mar 24, 2007 10:33 pm
Location: b.c

Post by stevethetileguy »

has anyone tried the 2674 bios with crossfire on a d975xbx2 if so any problems ?
qx6700 @3.8 , d975xbx2 , 2 gigs ocz reaper pc2 8500 x1950 xtx crossfire (695 core, 2200 mem), muskin 650 watt power supply , x-fi elite pro , dell 24 lcd , logitech z-5500, antec 180 ,6 - 120 mm fans + baybus
D.Unnerstall
Legit User
Legit User
Posts: 10
Joined: Wed Mar 21, 2007 5:56 pm

bios 2674

Post by D.Unnerstall »

I've just had a problem with update. Just got this new system(975xbx2x) up & running. all is well. winXP loaded .drivers loaded. then flashed with 2674 & xp came up seeing new hardware? can't load any drivers or software to make it happy. device manager shows 2 pci slots not working.don't which two? my sound card & video card are working & don't have anything else plugged in! :cry:
User avatar
IRQ Conflict
Legit Extremist
Legit Extremist
Posts: 257
Joined: Thu Feb 15, 2007 10:26 pm

Post by IRQ Conflict »

The flash may have reset something? like the on board sound?
-Rampage- Motherboard: Asus Rampage Formula CPU: Q6600 @ 3.2Ghz Cooling: OCZ Vendetta 2 Ram: 4GB OCZ Reaper HPC PC2-8500 5-5-5-15 @ 540Mhz Video Card: Sapphire Radeon HD 5870 Storage: Seagate Barracuda 7200.10 320GB/4x 500GB Barracuda 7200.11 Raid 0 Power Supply: PC P&C Silencer 750 Quad Case: Antec P180B Monitor: Syncmaster 245T OS: Vista 64bit
Image
User avatar
dicecca112
Site Admin
Site Admin
Posts: 5014
Joined: Mon Mar 01, 2004 10:40 am
Contact:

Post by dicecca112 »

well if you followed proper flash procedure you set the motherboard to defaults before flashing, like IRQ said you may have disabled something in the bios, that you didn't redisable after the flash
Image
D.Unnerstall
Legit User
Legit User
Posts: 10
Joined: Wed Mar 21, 2007 5:56 pm

bios 2674

Post by D.Unnerstall »

thanks for the advice. I can't find any different settings.I left the onboard soundcard enabled(even with Soundblaster) because if it's disabled, then the front audio ports go with it..What happens if I try reflashing cause I may not have had DEFAULTS set at reflash? While your reading this..why can't I set Configure SATA as AHCI? Have ATA/SATA setting as (Native) Have two Seagate 320 SATA 2 300 drives on black SATA ports 0 & 1. It works on IDE setting,but doesn't make sense to me?
User avatar
IRQ Conflict
Legit Extremist
Legit Extremist
Posts: 257
Joined: Thu Feb 15, 2007 10:26 pm

Post by IRQ Conflict »

You have to install the matrix (RAID) drivers off the floppy during the OS install as you would if you were setting up for a raid array. I know, it's not documented, I had to find out the hard way as well.

/no thanks to Intel.
-Rampage- Motherboard: Asus Rampage Formula CPU: Q6600 @ 3.2Ghz Cooling: OCZ Vendetta 2 Ram: 4GB OCZ Reaper HPC PC2-8500 5-5-5-15 @ 540Mhz Video Card: Sapphire Radeon HD 5870 Storage: Seagate Barracuda 7200.10 320GB/4x 500GB Barracuda 7200.11 Raid 0 Power Supply: PC P&C Silencer 750 Quad Case: Antec P180B Monitor: Syncmaster 245T OS: Vista 64bit
Image
Post Reply