Page 1 of 1
Q8300
Posted: Sat Apr 24, 2010 5:11 pm
by skier
well, on monday i'm ordering a Q8300 2.5GHz (1333MHz/333MHz FSB) and was wondering what people think i'll be able for clocks, the board i'm using is in my Sig, and has gotten my E7200(1066/266) @ 4.15GHz 1750/437, but i now have better cooling
my goal is at least 3.5GHz, 4GHz would be nice ;)
Re: Q8300
Posted: Wed Apr 28, 2010 11:43 am
by skier
Let the fun begin
- Q8300stock.jpg (212.61 KiB) Viewed 4814 times
Re: Q8300
Posted: Thu Apr 29, 2010 9:10 am
by DJ Tucker
you should be able to get 3.5ghz but 4ghz will be pushing it on that board but nonetheless try it and post back the results!
Re: Q8300
Posted: Thu Apr 29, 2010 12:09 pm
by skier
well so far it seems my board died
it keeps hanging after POST(thats right, it POSTS, can get into BIOS, but hangs after that EVERY time) have tried every configuration i could think of and still nogo.
Re: Q8300
Posted: Thu Apr 29, 2010 3:56 pm
by geokilla
Ouch... You bought the Q8300 just so you could put the mobo to good use too.
Re: Q8300
Posted: Thu Apr 29, 2010 4:34 pm
by skier
i managed to get 3.16GHz mostly stable before it went stoopid on me, CPU scored 12112 pts in 3DM Vantage without physx
Re: Q8300
Posted: Sun May 02, 2010 3:03 pm
by DJ Tucker
skier wrote:well so far it seems my board died
it keeps hanging after POST(thats right, it POSTS, can get into BIOS, but hangs after that EVERY time) have tried every configuration i could think of and still nogo.
your board does exactly what mine does! everything i try after 3.562ghz/375FSB and it POSTS then hangs at the load screen. i tried waiting 30 mins just for it to pass but still no luck and 3.562ghz seems the max i can go but, should be able to get 3.8ghz/400FSB minimum
Re: Q8300
Posted: Sun May 02, 2010 5:27 pm
by skier
DJ Tucker wrote:
your board does exactly what mine does! everything i try after 3.562ghz/375FSB and it POSTS then hangs at the load screen. i tried waiting 30 mins just for it to pass but still no luck and 3.562ghz seems the max i can go but, should be able to get 3.8ghz/400FSB minimum
the difference is, you board does that at an overclock, mine does it at ANY frequency or voltage, including-but not limited to: Stock.