Page 1 of 1

Q6600 overclocking

Posted: Fri Dec 17, 2010 11:44 pm
by skier
as the title says, my VID is pretty high, 1.32500v, but as you can see below it runs just fine an' dandy at significantly lower (1.21875 in BIOS, which equates to below at prime95 blend load)
1.168v reported1.jpg
temps havn't gone down too fast, but they have gone down

anyone wanna guess what is happening? or maybe guesses to my max clock on it :mrgreen:

lowest stable 2.43GHz: 1.136v
lowest stable 2.6GHz: 1.160v *testing

Re: Q6600: high VID, super low stable vcore

Posted: Sun Dec 19, 2010 7:19 pm
by skier
WOOO killed my G31 board via VDROOP pencil-mod

this kinda sucks.

Re: Q6600: high VID, super low stable vcore

Posted: Sun Dec 19, 2010 9:11 pm
by hark
Ah... R.I.P. :(

Re: Q6600 Overclocking

Posted: Thu Jan 06, 2011 4:24 pm
by skier
Finally got my system up again!
3.2.jpg
going on 10min stable so far