Q6600 & E8400 FSB Barrier...

[Methious]

Due to recent power outages in his area his reply will be delayed. (Joke)

I've been reading on the early degradation of the new 45nm chips when their running above recommended voltage. Any one think it's because lead has been removed from the manufacturing process?

[TheGanG]

Due to recent power outages in his area his reply will be delayed. (Joke)

I've been reading on the early degradation of the new 45nm chips when their running above recommended voltage. Any one think it's because lead has been removed from the manufacturing process?

Congrats, thats still nothing to complain about. Very Nice indeed!

What voltage is required to get the quad to 4.1Ghz stable?

At first voltages for E8400
Well at first i hit a 4050/no +voltages, it posts...
restart to check auto voltages at BIOS...
CPU: Auto/1,31
FSB: Auto/1,3
DDR2: Auto/2,2
SPP: Auto/1,4
MCP: Auto/1,5
SPP<>MCP: Auto/1,2



and restart to BIOS dealing voltages...
CPU: Auto/1,31>>>1,4
FSB: Auto/1,3>>>1,3
DDR2: Auto/2,2>>>DDR2: Auto/2,2
SPP: Auto/1,4>>>1,4
MCP: Auto/1,5>>>1,5
SPP<>MCP: Auto/1,2>>>1,2
restart again...

works...
at this point i play HL deathmacth...

works...
Lian Li Aluminum Rack Case and my Water Loop:



for Q6600/4,1 GHz:
CPU: 1,65 max
FSB: 1,5
DDR2: Auto/2,2
SPP: 1,5/1,5+
MCP: 1,7 max
SPP<>MCP: 1,5

[TheGanG]

Pulled down NB temp and pushed E8400 to 4813 MHz; +VCore/+FSB/Others Auto...

NB: 41 C!
Core T. Idle: 29/33
Post: 4700 MHz
+VCore/Others Auto
Pi: 9,797



NB: 40 C!
Core T. Idle: 30/33
Post: 4770 MHz
+VCore/Others Auto
Pi: -



NB: 41 C!
Core T. Idle: 29/33
Post: 4813 MHz
+VCore/+FSB/Others Auto
Pi: -

[martini161]

what do you use to get your nb temps?

[TheGanG]

what do you use to get your nb temps?

Everest is better for me...