e5200 stock heatsink on e2140 @ 2.66ghz?

[GI-JOE]

Was deciding whether or not to pick up a e5200. If I do, I would give my e2140 @ 2.66ghz to my brother. The only problem is, I would need to use the e5200 stock heatsink for him. Would it be enough to cool the e2140 overclocked? Thanks in advance!

[DMB2000uk]

What voltage did you have to use? And what sort of cooling using and temps are you currently seeing?

Dan

[GI-JOE]

Stock volts, and 68 degrees farenheit idle, 82 degrees farenhiet load

[DMB2000uk]

What cooler are you currently using? And what were the ambients with those results?

Sorry for all the questions, but I need to know the full picture here

Dan

[GI-JOE]

I am using this cooler currently:
http://www.newegg.com/Product/Product.a ... 6835200035

The ambient temps are usually around 70 --- 75 F.

[DMB2000uk]

You'll see a lot higher temps, but I think it will work out ok.

I can't find any direct temperature comparisons between the stock half height cooler and the stock full height cooler, but at worst case you should see load temps around 120F which is well within spec safety limits.

Dan

[GI-JOE]

Cool, thanks!

[TheGanG]

i just finished a fan cooler test and it may help some...

CPU: E8600
Load: Prime95
AMBIENT 24.1°C-24.6°C
STOCK CPU 1.22V-3336MHZ
OC CPU 1.28V-4166MHZ

SilverStone NT06 Evolution
+ FM123 (106.3 CFM-39.5 dBA)

STOCK %100 2600RPM
IDLE 27°C
SYS 34°C
LOAD 53-52°C
SYS 34°C

STOCK %50 1300 RPM
IDLE 28°C
SYS 35°C
LOAD 56-53°C
SYS 38°C

OC %100 2600RPM
IDLE 29°C
SYS 34°C
LOAD 59-58°C
SYS 34°C

OC %50 1300RPM
IDLE 30°C
SYS 35°C
LOAD 63-62°C
SYS 38°C



Thermaltake DuOrb
+ 2 x 80mm Fan (37.67CFM-21dBA)

STOCK %100 2100RPM
IDLE 24°C
SYS 34°C
LOAD 48-46°C
SYS 34°C

STOCK %50 1050 RPM
IDLE 25°C
SYS 34°C
LOAD 51-49°C
SYS 36°C

OC %100 2100RPM
IDLE 26°C
SYS 34°C
LOAD 56-53°C
SYS 34°C

OC %50 1050RPM
IDLE 26°C
SYS 34°C
LOAD 58-56°C
SYS 37°C



Noctua NH-U12P
+ NF-P12 (54.3CFM-19.8dBA)

STOCK %100 1250RPM
IDLE 24°C
SYS 34°C
LOAD 48-46°C
SYS 35°C

STOCK %50 625 RPM
IDLE 25°C
SYS 35°C
LOAD 52-50°C
SYS 39°C

OC %100 1250RPM
IDLE 25°C
SYS 35°C
LOAD 55-53°C
SYS 35°C

OC %50 625RPM
IDLE 26°C
SYS 35°C
LOAD 60-59°C
SYS 40°C



Cooler Master Hyper Z600
+ 2 x CM A12025-12CB-5BN-L1 (42.73CFM-22dBA) 2 FAN

STOCK %100 1250RPM
IDLE 23°C
SYS 33°C
LOAD 48-46°C
SYS 34°C

STOCK %50 625RPM
IDLE 24°C
SYS 35°C
LOAD 51-50°C
SYS 36°C

OC %100 1250RPM
IDLE 26°C
SYS 36°C
LOAD 55-53°C
SYS 36°C

OC %50 625RPM
IDLE 27°C
SYS 36°C
LOAD 62-60°C
SYS 38°C



Cooler Master Hyper Z600
+ 1 x CM A12025-12CB-5BN-L1 (42.73CFM-22dBA) 1 FAN

STOCK %100 1250RPM
IDLE 26°C
SYS 33°C
LOAD 49-47°C
SYS 34°C

STOCK %50 625RPM
IDLE 26°C
SYS 35°C
LOAD 53-51°C
SYS 37°C

OC %100 1250RPM
IDLE 27°C
SYS 37°C
LOAD 58-56°C
SYS 38°C

OC %50 625RPM
IDLE 28°C
SYS 37°C
LOAD 65-64°C
SYS 38°C



Cooler Master Hyper Z600
PASSIVE

STOCK
IDLE 27°C
SYS 35°C
LOAD 57-55°C
SYS 36°C



Titan Cool Idol TTC-NK75TZ
+ Titan ZX CE (78.41CFM-39dBA)

STOCK %100 2200RPM
IDLE 24°C
SYS 34°C
LOAD 45-45°C
SYS 34°C

STOCK %50 1100 RPM
IDLE 24°C
SYS 35°C
LOAD 50-47°C
SYS 35°C

OC %100 2200RPM
IDLE 25°C
SYS 34°C
LOAD 56-53°C
SYS 35°C

OC %50 1100RPM
IDLE 26°C
SYS 35°C
LOAD 58-56°C
SYS 36°C



STOCK FAN

STOCK %100 1800RPM
IDLE 26°C
SYS 34°C
LOAD 61-59°C
SYS 34°C

STOCK %50 900 RPM
IDLE 28°C
SYS 36°C
LOAD 72-70°C
SYS 36°C

OC %100 1800RPM
IDLE 30°C
SYS 35°C
LOAD 76-75°C
SYS 38°C

[GI-JOE]

Cool, that will help a lot. Thanks!