
Would it be worth it?
Would it be worth it?
I work on a laptop at work that has a T7300 core 2 duo and was wondering if it is worth the hassle to fold on it. Its usually on about 8 hours a day, but I could leave it on all night during the week if need be. So what do you guys think? Should I go for it? 

-----------------------------------------------------
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: Would it be worth it?
Sure any work production and points helps both the team and the cause. Anything is better than nothing.
Re: Would it be worth it?
Cool, Folding at the moment of posting! 

-----------------------------------------------------
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- Alathald
- Legit Extremist
- Posts: 1630
- Joined: Sun Dec 17, 2006 11:55 pm
- Location: Southern Ohio
- Contact:
Re: Would it be worth it?
Just be sure to watch the temps, might setup a fan next to one of the intakes...
Re: Would it be worth it?
Keep an eye out on overall system temps as laptops get rather toasty when folding.
Dan
Edit: Ninja'd >_<
Dan
Edit: Ninja'd >_<
Re: Would it be worth it?
Will do, so far only cooking 1 core at 147 degrees farenheit so not bad. 

-----------------------------------------------------
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
Re: Would it be worth it?
Just curious, what kind of environment is it in? Hope it's rather cool at night. But like the others have said just watch the temps.
Intel i7 2600k @ 4.8ghz
Asus P8P67 PRO
ATI 5870
8 GB G-Skill Ripjaw X 1600 @ 7-8-7-24
120gb G-Skill Sniper SSD

Asus P8P67 PRO
ATI 5870
8 GB G-Skill Ripjaw X 1600 @ 7-8-7-24
120gb G-Skill Sniper SSD
Re: Would it be worth it?
A very big (and clean) warehouse that is constantly kept about 66 to 68 degrees I would say.Mad_Goku wrote:Just curious, what kind of environment is it in? Hope it's rather cool at night. But like the others have said just watch the temps.
-----------------------------------------------------
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w