Q9650 *Not Extreme* Tests

[TheGanG]

I have a new chip! (just hours!)

This is a good cpu specially for 4 core sensitive Pi Fast Aqua and 2K6
Waiting for dice tests

First run:

[email protected] GHz
BlackOps X48
Kingston Hyperx 1800
EVGA 9800GX2 SC
High Power 1000W

Valid: 4109 MHz

http://valid.canardpc.com/show_oc.php?id=498525

PiFast: 4045 MHz/22.77 Sn.



2K6: 3.7 GHz/20.987



Aqua: 3.7 GHz/237.415

[TheGanG]

BIOS VCore: 1.45V

http://valid.canardpc.com/show_oc.php?id=498651

[TheGanG]

That's my LP DK P45-T2RS PLUS and my previous Q 45 nm settings,

Freq : 4360.66 MHz (484.52 * 9)


Valid:

http://valid.canardpc.com/show_oc.php?id=498779

[martini161]

dang, thats a real nice clock for only 1.45 vcore! what kind of actuall voltage are you seeing on it? (if you measured) my q6600 needs 1.53125 volts in bios to be 24/7 stable!

[TheGanG]

dang, thats a real nice clock for only 1.45 vcore! what kind of actuall voltage are you seeing on it? (if you measured) my q6600 needs 1.53125 volts in bios to be 24/7 stable!

Actually my first BlackOps tests, It's a bug on CPU-Z+motherboard, so it shows 1.4V real > about 1.57-1.58 at CPU-Z...
DFi needs a bit higher VCore but seems more stable, 1.45V-1.48V depends on CPU MHz. I know people at XS, 4.3 GHz/below 1.40V with Prime95 stable...