My Overclocking Addiction

Discussions about AMD Processors and overclocking. Need help with that new AMD CPU or not sure which one to buy? Like to void your warranty? This is the place for you! Please keep the topic on Processors only!
Post Reply
spitter
Legit Extremist
Legit Extremist
Posts: 252
Joined: Mon Jul 13, 2009 1:33 am

My Overclocking Addiction

Post by spitter »

I decide to buy the Fry's special. a Phenom II x4 805 for $80 , figuring that a quad at 2.5gigs is better than dual core at 3gigs. The 805 is a locked core and I promised myself not to try to overclock the thing because playing with bus speed on any of my AMD processors has not been good to me, but the urge to try is getting to strong, I am getting weak....can't keep myself out of the bios. I think I need some help, what the first step, drop the memory speed then up the bus??
User avatar
jedihobbit
Legit Fanatic
Legit Fanatic
Posts: 187
Joined: Tue Nov 11, 2008 9:57 pm
Location: Central VA, USA

Re: My Overclocking Addiction

Post by jedihobbit »

System Specs??
DreamCatcher v4.0 DOA >> SG01 Evo, TA790GXE, PII X4 945 (AQ H2O Cooled), BFG GTX280 H2OC, Seagate 7200.10 ST380815AS 80GB, 2 x WD5000KSs, TWIN2X4096-8500C5DF, MODU82+ EMD525AWT, XP Home SP2
Kermit v4.0 VIRUSed >> Ultra MX6, 785GM-E65, PII X4 955 @ 3.70GHZ(air), XFX GTX285, Raptor X, F3-12800CL7D-2GBPI, OCZ700MXSP ModXStream Pro, XP Home SP2
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE @ 3.00GHZ(air), 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
spitter
Legit Extremist
Legit Extremist
Posts: 252
Joined: Mon Jul 13, 2009 1:33 am

Re: My Overclocking Addiction

Post by spitter »

BIOSTAR A760G M2+ AM2+/AM2 AMD 760G Micro ATX AMD Motherboard
PNY 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model MD4096KD2-800
User avatar
jedihobbit
Legit Fanatic
Legit Fanatic
Posts: 187
Joined: Tue Nov 11, 2008 9:57 pm
Location: Central VA, USA

Re: My Overclocking Addiction

Post by jedihobbit »

Looks like we may be "helping" each other as we are using the same mobo and your mem specs look like my Corsair :) How far into the bios have you gone and how much have you oc'ed before?

Sadly I've just got off work and am totally whipped (it is 01:48 here). If no one else comes along I'll try to give you my suggestions, but yes lower the mem to 800, run 5-5-5-15 @T2 with vdimm at 2.1V. If you are running the stock cooler I would start with the FSB @ +2 each time and see if it will run a 8M run of Super Pi. However to get anywhere you will need to up the vcore and that calls for an after market cooler also to do any serious oc'ing you'll need to look into cooling the mosfets also.
DreamCatcher v4.0 DOA >> SG01 Evo, TA790GXE, PII X4 945 (AQ H2O Cooled), BFG GTX280 H2OC, Seagate 7200.10 ST380815AS 80GB, 2 x WD5000KSs, TWIN2X4096-8500C5DF, MODU82+ EMD525AWT, XP Home SP2
Kermit v4.0 VIRUSed >> Ultra MX6, 785GM-E65, PII X4 955 @ 3.70GHZ(air), XFX GTX285, Raptor X, F3-12800CL7D-2GBPI, OCZ700MXSP ModXStream Pro, XP Home SP2
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE @ 3.00GHZ(air), 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
spitter
Legit Extremist
Legit Extremist
Posts: 252
Joined: Mon Jul 13, 2009 1:33 am

Re: My Overclocking Addiction

Post by spitter »

Off good start, my heatsink is a mugen 2, so it will work for the time being, dropped the memory setting to 667 mhz and changed t1 to t2 manual, set the bus to 232 and I am running prime95 right now, 3dmark ran perfectly and so did aquamark. Upped the cpu voltage and can do it some more. primes been running 30 minutes now and has topped out at 43c, good night I am letting it run all night.

Image
User avatar
jedihobbit
Legit Fanatic
Legit Fanatic
Posts: 187
Joined: Tue Nov 11, 2008 9:57 pm
Location: Central VA, USA

Re: My Overclocking Addiction

Post by jedihobbit »

spitter wrote:Off good start........
=D>

Don't know what the stock vcore is for the 805, but that appearst to be a good start and wouldn't up it anymore until you start having stability problems. Your HSF I would think will be fine for what you'll be able to do, however one thing I will strongly suggest is be add some passive coolers to the mosfets as Biostar mobos have been know to cook one or more with oc'ing. In my mATX case I'm water cooling so I did the passive and added a fan above them. Since the mosfets on this board are kinda laid out rather “uniquely” I ended up using the Enzotech BMR-C1s left over from doing the M3A78-CM in Kermit. These are for video cards and their 14mm square size allowed me to cover 2 chips at a time. I then finished it off with Enzotech MOS-C1s for the “little” guys.

Image Image
DreamCatcher v4.0 DOA >> SG01 Evo, TA790GXE, PII X4 945 (AQ H2O Cooled), BFG GTX280 H2OC, Seagate 7200.10 ST380815AS 80GB, 2 x WD5000KSs, TWIN2X4096-8500C5DF, MODU82+ EMD525AWT, XP Home SP2
Kermit v4.0 VIRUSed >> Ultra MX6, 785GM-E65, PII X4 955 @ 3.70GHZ(air), XFX GTX285, Raptor X, F3-12800CL7D-2GBPI, OCZ700MXSP ModXStream Pro, XP Home SP2
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE @ 3.00GHZ(air), 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
spitter
Legit Extremist
Legit Extremist
Posts: 252
Joined: Mon Jul 13, 2009 1:33 am

Re: My Overclocking Addiction

Post by spitter »

As finances permit, I will get some of those little copper coolers, two boards and two video cards make it a little bit more then I need to spend right now, stock voltage for the 805 was 1.25 volts in the bios, 1.238 off the diode. The overclock bios setting is 1.4(it is locked at 1.3 with a .1volt startup boost ) .
User avatar
jedihobbit
Legit Fanatic
Legit Fanatic
Posts: 187
Joined: Tue Nov 11, 2008 9:57 pm
Location: Central VA, USA

Re: My Overclocking Addiction

Post by jedihobbit »

As I've never dealt with a quad-core I'm not quit sure how Super Pi would work with it, but I use that for "quick" testing before doing the time consuming ones like Prime and OCCT. Hope some picks up on this to make reccomendations of some quick test software for quads to speed your attempts up. I usually use Super Pi to "take it to the limit" and then back down the values for "stable" settings testing. :)
DreamCatcher v4.0 DOA >> SG01 Evo, TA790GXE, PII X4 945 (AQ H2O Cooled), BFG GTX280 H2OC, Seagate 7200.10 ST380815AS 80GB, 2 x WD5000KSs, TWIN2X4096-8500C5DF, MODU82+ EMD525AWT, XP Home SP2
Kermit v4.0 VIRUSed >> Ultra MX6, 785GM-E65, PII X4 955 @ 3.70GHZ(air), XFX GTX285, Raptor X, F3-12800CL7D-2GBPI, OCZ700MXSP ModXStream Pro, XP Home SP2
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE @ 3.00GHZ(air), 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
spitter
Legit Extremist
Legit Extremist
Posts: 252
Joined: Mon Jul 13, 2009 1:33 am

Re: My Overclocking Addiction

Post by spitter »

http://downloads.guru3d.com/downloadget ... 9f96c3bb65

Seem to be a good quick test for Quads, PI is good but since it is only a single thread for quad you have to start it 4 times, dropped the volts by .05(currently 1.312) and the temps have come down by 5c. :mrgreen:
User avatar
jedihobbit
Legit Fanatic
Legit Fanatic
Posts: 187
Joined: Tue Nov 11, 2008 9:57 pm
Location: Central VA, USA

Re: My Overclocking Addiction

Post by jedihobbit »

IntelBurn is pretty good, but be very careful using it with AMD as I've seen it fry one!
DreamCatcher v4.0 DOA >> SG01 Evo, TA790GXE, PII X4 945 (AQ H2O Cooled), BFG GTX280 H2OC, Seagate 7200.10 ST380815AS 80GB, 2 x WD5000KSs, TWIN2X4096-8500C5DF, MODU82+ EMD525AWT, XP Home SP2
Kermit v4.0 VIRUSed >> Ultra MX6, 785GM-E65, PII X4 955 @ 3.70GHZ(air), XFX GTX285, Raptor X, F3-12800CL7D-2GBPI, OCZ700MXSP ModXStream Pro, XP Home SP2
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE @ 3.00GHZ(air), 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
spitter
Legit Extremist
Legit Extremist
Posts: 252
Joined: Mon Jul 13, 2009 1:33 am

Re: My Overclocking Addiction

Post by spitter »

Well, it's stable at 3gigs, with the voltage at 1.28, temps top out at about 38c, had to drop the memory speed down to 533 mhz. 3gig is what the last processor topped out at on this board, and no amount of volt increase would get it stable above that, so I think it is maxed out, I'm very happy with 3gigs. :)
User avatar
jedihobbit
Legit Fanatic
Legit Fanatic
Posts: 187
Joined: Tue Nov 11, 2008 9:57 pm
Location: Central VA, USA

Re: My Overclocking Addiction

Post by jedihobbit »

:supz:
DreamCatcher v4.0 DOA >> SG01 Evo, TA790GXE, PII X4 945 (AQ H2O Cooled), BFG GTX280 H2OC, Seagate 7200.10 ST380815AS 80GB, 2 x WD5000KSs, TWIN2X4096-8500C5DF, MODU82+ EMD525AWT, XP Home SP2
Kermit v4.0 VIRUSed >> Ultra MX6, 785GM-E65, PII X4 955 @ 3.70GHZ(air), XFX GTX285, Raptor X, F3-12800CL7D-2GBPI, OCZ700MXSP ModXStream Pro, XP Home SP2
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE @ 3.00GHZ(air), 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
Post Reply