For 5 months i have been putting up with a start up message " Realtec RTL 811QS Gigabyte boot agent, press F10 to configure". I don't know why this comes up all the time and when i press F10 it doesnt correct the issue anyway.
The computer still starts eventually if i dont press F10 but what is going on with this message and how do i fix it?
Start up issue
-
kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Re: Start up issue
That message is from your BIOS.
The option to "Boot from LAN" (or PXE boot) is enabled.
Should be listed along with the other boot options in your bios, just set to disabled and you should be good to go.
The option to "Boot from LAN" (or PXE boot) is enabled.
Should be listed along with the other boot options in your bios, just set to disabled and you should be good to go.
Re: Start up issue
There may be a setting for a 'Delay before Boot' or somesuch. Reduce it to 0. There is nothing wrong with your computer, a BIOS open prompt is normal and all computers have it.
Multiple Exclamation marks - The first sign of an unsound mind.
Rig: Intel 3930K, Noctua U12P-SE2 , ASUS P9X79, 16GB RAM, 60GB OCZ Vertex 3, 2x3TB Seagate (RAID 0), 1TB Samsung F3, EVGA GTX760, CM 650 Watt PSU
NZXT HU002 Case, LG Blu-Ray Writer/Combo
21.5" BenQ E2200HD @ 1920x1080, Razer Lachesis/Lycosa/Sennheiser HD558, Windows 8.1 Pro 64 Bit
Rig: Intel 3930K, Noctua U12P-SE2 , ASUS P9X79, 16GB RAM, 60GB OCZ Vertex 3, 2x3TB Seagate (RAID 0), 1TB Samsung F3, EVGA GTX760, CM 650 Watt PSU
NZXT HU002 Case, LG Blu-Ray Writer/Combo
21.5" BenQ E2200HD @ 1920x1080, Razer Lachesis/Lycosa/Sennheiser HD558, Windows 8.1 Pro 64 Bit