Pins are bent
Pins are bent
First off, can I RMA my 955 BE and replace it? Because this all started when I decided to replace the stock cooler with a Dark Knight, and as I was trying to take out the stock HS/F, the processor came out with it, stuck to the bottom. Uh oh. So after 5 minutes, I managed to pry off the CPU (with a plastic ruler, it flew off and it hit the ground pins up). As i tried again and again to place it back into the socket, i noticed that one side was sticking up kinda funny. And there they were. There were at least 5 pins bent. I really don't know what to do. I don't want to try to fix it, because i might void the warranty, or cause any more damage. Help!
Re: Pins are bent
you can only try to bend them back straight and use it, with bent or broken pins chips are non-returnable because it is "user induced damage" and AMD is not liable
try to straighten them, if one maybe two breaks off it *may* be a ground pin which is not required for use, so straighten all of them, and whether a pin breaks or not see if it can boot, if you don't get POST, then you're outta luck and have to buy a new chip, sorry. trust me, i know how it feels tho!
try to straighten them, if one maybe two breaks off it *may* be a ground pin which is not required for use, so straighten all of them, and whether a pin breaks or not see if it can boot, if you don't get POST, then you're outta luck and have to buy a new chip, sorry. trust me, i know how it feels tho!
-Austin
Screamin' BCLK:
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
Screamin' BCLK:
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
- InspectahACE
- Legit Extremist
- Posts: 1776
- Joined: Tue Sep 06, 2005 8:25 pm
- Location: Las Vegas
Re: Pins are bent
Ouch
i9-9900k | ASUS Maximus XI Hero | ASUS Strix RTX 2070 Super | 32GB G.Skill Trident RGB DDR4-3600 | Cooler Master ML360L AIO | Seagate Firecuda 510 1TB NVME SSD | Tt ToughPower RGB 850W PSU | Sound Blaster Z | LL PC-O11 Dynamic | ASUS Gladius II Mouse | ASUS Strix Scope RX| ASUS VG259QMM 24" 240hz monitor | Windows 11 Pro
Re: Pins are bent
well, the customer support guy (AMD has top-notch service, i got redirected three times, but the whole thing took about 10 minutes. :D ) said that if the damage was how i described it (5-10 pins bent, nothing else) then i would get RMA'd and a new one would be shipped back. now all i need to do is go to FedEx and hopefully the new one will be a C3 stepping.
Re: Pins are bent
did you try straightening them? or go straight to tech support
-Austin
Screamin' BCLK:
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
Screamin' BCLK:
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
Re: Pins are bent
yes, i did, but it was bent almost 90 degrees and i almost snapped it. plus, there were some almost in the middle and if i tried to bend those, i might bend some others on accident.
-
- Legit Fanatic
- Posts: 124
- Joined: Thu Jun 30, 2005 3:33 pm
Re: Pins are bent
I have dealt with bent processor pins in the past. luckily I was able to bend them back and everything worked fine.
Re: Pins are bent
Doesn't matter much if you are getting it RMA'ed. If you were not able to get an exchange, you could try straightening them yourself (like somebody has already said). If pin(s) happen to break off, you can leave them out and put the processor into the socket and see if it POSTs..hopefully those missing pins were ground pins (someone else also said). If the missing pins are critical, then you can straighten them out, and put them in the correct "hole" in the socket, then put the CPU in the socket like normal. If the pins are in contact with the CPU and in the socket, you could possibly save your processor.
I broke one of the pin on a CPU that i had and that technique saved me from buying another one.
I broke one of the pin on a CPU that i had and that technique saved me from buying another one.
Cooler Master HAF 932 // Phenom II 1090T @ 4.1GHz (not 110% stable) // ASUS Crosshair V Formula 990FX // Thermaltake Frio CPU Cooler // Sapphire Dual-X HD 7970 @ 1150/1500 // 8GB (2X4GB) G.Skill RipJaws + 8GB (2X4GB) G.Skill RipJawsX @1600 8-9-8-21-1T // Corsair TX850 // Corsair ForceGT 120GB SSD // Kingston V200+ 120GB SSD // WD Caviar Black 1TB // LiteON DVD-RW // Windows 7 Ult. 64-bit