Ken's X2 IHS removal
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Ken's X2 IHS removal
Well........I started cutting with the razor blade......then I cut into the chip
I could have sworn I killed it....So I put it back into the mobo....no boot, nothing..... cue brown pants
I reset the bios as all is well.....but it's not done yet! My hands are still shaking BIG TIME!!! --> ~500euro.....
I've got ~30% done......I'm going to fininsh this in an hour or so.....I need to calm down....my hands are sweating....my heart is pumping and I'm a complete wreck LOL
I WILL FINISH THIS TONIGHT!!!!
It's alot different to the Celeron "removal" -> I killed that on purpose....I don't want to kill this chip, sorry for this pointless post, but I need to vent off some steam B4 I go back to this LOL
Pics will follow (dead or alive)
wish me luck!
I could have sworn I killed it....So I put it back into the mobo....no boot, nothing..... cue brown pants
I reset the bios as all is well.....but it's not done yet! My hands are still shaking BIG TIME!!! --> ~500euro.....
I've got ~30% done......I'm going to fininsh this in an hour or so.....I need to calm down....my hands are sweating....my heart is pumping and I'm a complete wreck LOL
I WILL FINISH THIS TONIGHT!!!!
It's alot different to the Celeron "removal" -> I killed that on purpose....I don't want to kill this chip, sorry for this pointless post, but I need to vent off some steam B4 I go back to this LOL
Pics will follow (dead or alive)
wish me luck!
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
It was a replay of the celeron incident!!
I cut around with the blade (disposable razor), It's still wouldn't come off!!! I used a hair dryer....Still nothing...
So I used my trusty tweasers.....and POP!
TOLEDO NAKED......... (sorry for the bad pic, but I don't care...IT'S DONE!)
I'm running dual prime now.....temps look very good
Max OC may have to wait till 2moro as it's 4am here......but I still have beer left sooo ;)
:edit:
I also used dental floss to finish off the last bits
:edit again:
I cut around with the blade (disposable razor), It's still wouldn't come off!!! I used a hair dryer....Still nothing...
So I used my trusty tweasers.....and POP!
TOLEDO NAKED......... (sorry for the bad pic, but I don't care...IT'S DONE!)
I'm running dual prime now.....temps look very good
Max OC may have to wait till 2moro as it's 4am here......but I still have beer left sooo ;)
:edit:
I also used dental floss to finish off the last bits
:edit again:
Dude, I can't believe you took a knife to it while drinking beer...did you learn nothing from me Prolly needed it to calm your nerves...the first one I did I was quaking which probably is why I effed it up.
:edit:
we have to work on your photography skills...or maybe after the beer that looked clear to you?
:edit:
:edit:
we have to work on your photography skills...or maybe after the beer that looked clear to you?
:edit:
Joe
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
I've only had 4 beers in the last 6hrs!FZ1 wrote:Dude, I can't believe you took a knife to it while drinking beer...did you learn nothing from me Prolly needed it to calm your nerves...the first one I did I was quaking which probably is why I effed it up.
:edit:
we have to work on your photography skills...or maybe after the beer that looked clear to you?
:edit:
I was quaking when I cut all 'round and it didn't come off......flashback!
My photography skills? Once the IHS came off the last thing on my mind was that photo.....all I cared about was seein the bios asap LOL
TEMP UPDATE (dual prime - will test later with rthdribl running too)
OLD (also dual prime)
~38C - cpu
~36C - chipset
:edit:
Vcore is actually lower here so temps are lower naturally....forgot sorry -> Will test again with same vcore later
NEW
29C - cpu --> yep that's right!! 30mins dual prime!!!
40C - chipset????
oh also, this is with my fans @ ~1000rpm so can go lower!
:edit:
Thanx mate.....it was a bitch....but WHOOT!!!-mogwai wrote:i told you i had confidence in you, man
now testing 2.7GHz with 183 divider and 1.52v ---> 30mins dual prime
~2.72GHz was max max B4
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Update
NO extra overclock......I tried 2.75GHz -> fails dual prime in ~2mins (same as b4) -> tried upto and incl. 1.6v
BUT
now testing 2.65GHz with 1.52v (will try lower vcore)
temps
31C = CPU
34C = Chipset
With 1.57v (old setting) - cpu temp is 33C - old was 38C
So removing the IHS lowered temps by ~5C = but I mayby able to run alot lower vcore, thus lowering temps even more
:edit:
temps with dual prime and 5 loops of 3dmark
34C = CPU
37C = Chipset
42C = GFX
+ with all fans @ only ~1000rpm
Sweet......!
NO extra overclock......I tried 2.75GHz -> fails dual prime in ~2mins (same as b4) -> tried upto and incl. 1.6v
BUT
now testing 2.65GHz with 1.52v (will try lower vcore)
temps
31C = CPU
34C = Chipset
With 1.57v (old setting) - cpu temp is 33C - old was 38C
So removing the IHS lowered temps by ~5C = but I mayby able to run alot lower vcore, thus lowering temps even more
:edit:
temps with dual prime and 5 loops of 3dmark
34C = CPU
37C = Chipset
42C = GFX
+ with all fans @ only ~1000rpm
Sweet......!
Last edited by kenc51 on Sat Mar 04, 2006 10:37 am, edited 1 time in total.
Keep in mind guys , I'm new to OCing.
Why are you taking the IHS/IMS off? I'm going to guess for better cooling
Won't one stand a better chance of crushing the chip as the IH spreaders are supposed
to take about 70 [AMD]-100 [Intel] pounds of force while the chips them selves won't?
Glad things turned out for you.
Why are you taking the IHS/IMS off? I'm going to guess for better cooling
Won't one stand a better chance of crushing the chip as the IH spreaders are supposed
to take about 70 [AMD]-100 [Intel] pounds of force while the chips them selves won't?
Glad things turned out for you.
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
I just editted the above posts with more temps! (see bottom)
The IHS (intergrated heatspreader) Does protect the core, but it can trap heat and increase temps. Some people who remove it can OC even more, but some gain nothing.
It's hit&miss if you get lower temps or more OC.
In my case it was lower temps (alot lower)
It is very risky and not worth it unless your prepared to kill the chip (which I wasn't - ~500euro )
It's more a penis extension than anything else LOL
And yes you have to be VERY carefull not to crush the core, you need a hfs/waterblock which bolts on, otherwise the hsf won't fit
The IHS (intergrated heatspreader) Does protect the core, but it can trap heat and increase temps. Some people who remove it can OC even more, but some gain nothing.
It's hit&miss if you get lower temps or more OC.
In my case it was lower temps (alot lower)
It is very risky and not worth it unless your prepared to kill the chip (which I wasn't - ~500euro )
It's more a penis extension than anything else LOL
And yes you have to be VERY carefull not to crush the core, you need a hfs/waterblock which bolts on, otherwise the hsf won't fit
- Dragon_Cooler
- Legit Extremist
- Posts: 2405
- Joined: Wed Oct 12, 2005 10:17 am
- Location: DFW Texas
- Contact:
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Look @ the pic of the core....see the little brown things?Dragon_Cooler wrote:what does the dental floss do?
Well if you cut too deep or slip, they can be broken off very easilly!
You use dental floss to finish off the last bits of sealant......everything under the IHS is very delicate.......
:new temp update:
I've lowered my vcore to 1.48v but temps still stay @ 32C with dual prime
my temps only raise by 2C with 3d (gfx watercooled aswell)
I LOVE this new waterblock!!!
Just curious about the Alphacool Nex WB you're using.
How well does it compare to top WBs like Swiftech Storm, DD RBX/TDX, DD Maze4, D-Tek/Whitewater?
And is it a high or low restriction waterblock?
I'm in the market now to find a new WB for my upcomming rig.
My current rig uses a Silverprop Cyclone Evolution V2.0 which compared well to Maze4, but I'll need an even better one.
[EDITED]NM, I just found your thread.
How well does it compare to top WBs like Swiftech Storm, DD RBX/TDX, DD Maze4, D-Tek/Whitewater?
And is it a high or low restriction waterblock?
I'm in the market now to find a new WB for my upcomming rig.
My current rig uses a Silverprop Cyclone Evolution V2.0 which compared well to Maze4, but I'll need an even better one.
[EDITED]NM, I just found your thread.
I've removed the IHS on my 148 and it dropped temps 18C load, but now you're making me wanna do it on my opt165... just sold my opt170 and couldn't bear to cut that one off. I may have to do it on this 165 b/c I'm tempted. I feel like throwing a lotta volts to it. I'm on a switchtech storm.
DFI Ultra-D (SLI) | Opt165 (CCBWE 0551UPMW) | 306x9=2.75ghz @ 1.48v (1.525) on Storm, Bix2, Deltas, D5 Pump @ 30C/40C | 2x512 TwinMOS SP 3200 (BH5) 1T-1.5-2-2-6 5:6 250mhz @ 3.4V | X850XT (Maze4 Acetal) @ 621/635 | 2x74 Raid0 Raptors | 300gb (external) | OCZ 600W | Dell 2405fpw
-
- Legit Aficionado
- Posts: 65
- Joined: Wed Sep 07, 2005 11:10 pm
- Location: Mesa, Arizona