I hate computers more and more
I hate computers more and more
So as the saga continues, I got another hard drive for my old compuer. Installed it (hardware is never a problem), formatted it, installed windows on it. Now I can't connect to the internet. I use a cable modem thru a router. I have an ethernet controller issue (not sure if that's causing it) but it has a yellow ? and says it can't find the driver. I've looked all over the place, I can't find one either, I can't even find what brand it is. I tried to load like Realtek generic one I found and then it has an ! and says it isn't working right. No matter what, I can't get on the net with it. I've tried to search on the xp disc for the drivers and didn't find anything, tried going thru system32 on the hard drive, nothing. On top of all this, when I opened my computer, it says hard disk F, how did it get to F? It only had one hard drive (maxtor) and replaced it with Seagate not it says F not C. Don't know if this could mess things up but thought I better throw that in.
Also, there was a yellow ? beside audio multimedia, I found realtek drivers for it and loaded it and it went away. And the very last thing, I know have a freakin bird in the computer somewhere. Every once in a while, it chirps, I can't tell where it's coming from, just a chirp. I'm almost afraid it's from the new hard drive since it wasn't there before. I can't seem to make it do it (had my ear stuck to the computer for 10 minutes and nothing but when I walked away, chirp).
Any ideas ( and I will need complete walkthru steps cause I'm an idiot) to fix the internet/ethernet controller problems? I can't describe the chirp any better, sorry. It's always software problems that make me want to toss the damn thing out the window.
Also, there was a yellow ? beside audio multimedia, I found realtek drivers for it and loaded it and it went away. And the very last thing, I know have a freakin bird in the computer somewhere. Every once in a while, it chirps, I can't tell where it's coming from, just a chirp. I'm almost afraid it's from the new hard drive since it wasn't there before. I can't seem to make it do it (had my ear stuck to the computer for 10 minutes and nothing but when I walked away, chirp).
Any ideas ( and I will need complete walkthru steps cause I'm an idiot) to fix the internet/ethernet controller problems? I can't describe the chirp any better, sorry. It's always software problems that make me want to toss the damn thing out the window.
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
anyon
Anyone have any ideas?
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
board
It's a MSI K8T neo, ms 6702.
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
http://www.msi.com.tw/program/support/d ... 496&kind=1
always check the manufacturers website ;)
Mike
always check the manufacturers website ;)
Mike
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me 

looked
I tried to look for msi but couldn't get the right site, Thanks. So that means I have realtek ethernet controller and audio right? It has to be because it's an MSI board? Thanks
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
oh
Oh, also, this ethernet controller is why I can't see anything in my workgroup also huh? (trying to figure out how it works is all)
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
also
So I'm downloading the drivers on this puter and going to burn it and move it over, if that fixes the internet, workgroup, sound problems. I still don't know why the hard drives says "F" now instead of C, Will that cause a problem? Thanks
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
done
Ok, that fixed both the sound and the internet/workgroup.
The HD labeled F is still a problem and the chirp thing I'm still getting, it must be the new HD as far as I can tell. Why would it be doing that? I made sure it was secure in there and it isn't touching anything else. Could it be bad right out of the box?
Thanks
The HD labeled F is still a problem and the chirp thing I'm still getting, it must be the new HD as far as I can tell. Why would it be doing that? I made sure it was secure in there and it isn't touching anything else. Could it be bad right out of the box?
Thanks
NZXT Tempest Case with Ultra X3 1000w PS...............Velociraptor 300gb HD
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
Intel Core i7 920......................................................12 gb Corsair DDR-3 1333 Dominator Ram
Asus P6T Deluxe MB..................................................Asetek CPU Liquid Cooling
EVGA GTX295 Video..................................................Vista Home Prem 64
40" Toshiba Monitor
- pointreyes
- Legit Fanatic
- Posts: 230
- Joined: Wed Nov 23, 2005 2:26 pm
Re: done
Yes. Happened to me with a Whining Digital. Died on the tenth day. Maybe try the manufacturer's diagnostic tool on the drive to see if it finds anything. Also, if at all possible make sure that the power plug going in the video card is not part of the same line that is feeding the HDD.sbjlsmtj wrote:Could it be bad right out of the box?
Thanks
Diagram of Hardware Profile
----------------------------------------------------------
BSD Daemon Copyright 1988 by Marshall Kirk McKusick. All Rights Reserved.
----------------------------------------------------------
BSD Daemon Copyright 1988 by Marshall Kirk McKusick. All Rights Reserved.
Quote from Scott Muellers Upgrading and reparing PCs-16th edition:
Chapter 21-Page 1189-Paragraph 5
"Most hard dives today have sophisticated thermal compensation routines that make adjustments in head position realtive to the expanding and contracting platters. Most drives preform this thermal compensation routine every 5 minutes for the first 30 minutes the drive is running then every 30 minutes thereafter. In many drives, this procedure can be heard as a rapid tick-tick-tick-tick sound."
Give the new drive a chance.
Changing the drive letter from F to C will cause some problems. If the files/programs where loaded into F drive, they will be looking for the address to direct them to F drive: example:
F:/Program Files/Legit Forums rule/Number one.exe.
That file/program is located on F drive
Now, you change the drive letter to C.
You click on the shortcut " LEGIT Review is the best"
The shortcut can't find the program as its got the address[so to speak] of:F:/Program Files/Legit Forums rule/Number one.exe.
You however have changed the HDD to C. It can't find it cause you have no F drive or no program named that on F drive.
You live in an apartment/house. You have an address. For a joke you change your address on your mail sent to your house. Will you get your mail? Given the proper info, the computer will run it. It's us the user that usually screw it up most of the times
If you put your new HDD in, it should have been C by default. Then again, I don't know what they/you did in your bios set up either. A new install from scratch on a new drive hooked to the same IDE/SATA port should list it as C.
Keep in mind that your learning curve will have a number of ripples along the curveature surface relative to the users tangent offset.
Chapter 21-Page 1189-Paragraph 5
"Most hard dives today have sophisticated thermal compensation routines that make adjustments in head position realtive to the expanding and contracting platters. Most drives preform this thermal compensation routine every 5 minutes for the first 30 minutes the drive is running then every 30 minutes thereafter. In many drives, this procedure can be heard as a rapid tick-tick-tick-tick sound."
Give the new drive a chance.
Changing the drive letter from F to C will cause some problems. If the files/programs where loaded into F drive, they will be looking for the address to direct them to F drive: example:
F:/Program Files/Legit Forums rule/Number one.exe.
That file/program is located on F drive
Now, you change the drive letter to C.
You click on the shortcut " LEGIT Review is the best"
The shortcut can't find the program as its got the address[so to speak] of:F:/Program Files/Legit Forums rule/Number one.exe.
You however have changed the HDD to C. It can't find it cause you have no F drive or no program named that on F drive.
You live in an apartment/house. You have an address. For a joke you change your address on your mail sent to your house. Will you get your mail? Given the proper info, the computer will run it. It's us the user that usually screw it up most of the times
If you put your new HDD in, it should have been C by default. Then again, I don't know what they/you did in your bios set up either. A new install from scratch on a new drive hooked to the same IDE/SATA port should list it as C.
Keep in mind that your learning curve will have a number of ripples along the curveature surface relative to the users tangent offset.

Re: done
Whining Digital???pointreyes wrote:Yes. Happened to me with a Whining Digital. Died on the tenth day. Maybe try the manufacturer's diagnostic tool on the drive to see if it finds anything. Also, if at all possible make sure that the power plug going in the video card is not part of the same line that is feeding the HDD.sbjlsmtj wrote:Could it be bad right out of the box?
Thanks