ABIT KN9 SLI Motherboard with Socket AM2 Processor
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
ABIT KN9 SLI Motherboard with Socket AM2 Processor
ABIT KN9 SLI Motherboard Picture:
The KN9 SLI motherboard is a standard ATX board and has support for socket AM2, DDR2 memory, six SATA II ports, ten USB 2.0 ports and dual SLI, along with ABIT's Silent OTES cooling system. It's based on NVIDIA's MCP55 single-chip solution.
ABIT KN9 Motherboard Features:
- NVIDIA MCP55P AM2 ATX Board
- SLI Technology
- Dual DDR2 667MHz Memory Channels
- 6 SATA 300 Ports
- Dual NV GBit Lan with Firewall
- 7.1 Channel HD Audio
- ABIT Silent OTES Heatpipe Kühlung
The KN9 SLI motherboard is a standard ATX board and has support for socket AM2, DDR2 memory, six SATA II ports, ten USB 2.0 ports and dual SLI, along with ABIT's Silent OTES cooling system. It's based on NVIDIA's MCP55 single-chip solution.
ABIT KN9 Motherboard Features:
- NVIDIA MCP55P AM2 ATX Board
- SLI Technology
- Dual DDR2 667MHz Memory Channels
- 6 SATA 300 Ports
- Dual NV GBit Lan with Firewall
- 7.1 Channel HD Audio
- ABIT Silent OTES Heatpipe Kühlung
- pointreyes
- Legit Fanatic
- Posts: 230
- Joined: Wed Nov 23, 2005 2:26 pm
Only two PCI slots? Hmmmm, to that board.
Diagram of Hardware Profile
----------------------------------------------------------
BSD Daemon Copyright 1988 by Marshall Kirk McKusick. All Rights Reserved.
----------------------------------------------------------
BSD Daemon Copyright 1988 by Marshall Kirk McKusick. All Rights Reserved.
-
- Legit Aficionado
- Posts: 65
- Joined: Wed Sep 07, 2005 11:10 pm
- Location: Mesa, Arizona
- dicecca112
- Site Admin
- Posts: 5014
- Joined: Mon Mar 01, 2004 10:40 am
- Contact:
- pointreyes
- Legit Fanatic
- Posts: 230
- Joined: Wed Nov 23, 2005 2:26 pm
SCSI controller (which due to it's size will only fit in one slot - no picking which slot to use with the 2005/2006 PCI Express boards)Apoptosis wrote:Just curious, but why do you guys need more than two PCI slots? I use 0 on my personal system.
Sound
TV Tuner (have an antenna, only the Hauppauge has proven worthy of the ability to tune plus my NLE machine cannot function with an AIW card).
Wish I could have my SATA RAID controller in that system but instead I have to run a separate box just for that controller. However, I don't save any money purchasing a PCIe controller and most PCIe slots for the desktop will not support the 8x PCIe controller requirements. Thus, PCI and PCI-X slots are of importance for me.
Diagram of Hardware Profile
----------------------------------------------------------
BSD Daemon Copyright 1988 by Marshall Kirk McKusick. All Rights Reserved.
----------------------------------------------------------
BSD Daemon Copyright 1988 by Marshall Kirk McKusick. All Rights Reserved.
Wouldn't agree. I own KN8 SLI and it's a rather ice board with heatpipe cooling. The KN9 SLI looks almost identical except they even fixed some layout issues. PCI molex is moved from the bottom to above the first PCIE connector, four-pin PSU connector has been moved to the upper edge and the floppy connector is still at bottom but moved to the edge of the board.EvilCloudStrife wrote:is abit back in the game with AM2? hopfully. Seems to me, everything they put out for 939 has been trash
Also, the board also got the only really missing feature (ok, uGuru wouldn't hurt also) of the KN8 SLI - HD Audio support. ALC850 on KN8 SLI proved awful on my first try with America's Army and teamspeak.
BTW, in most reviews they found the floppy connector position a minus. I actually prefer it since I can fold the cable so it is routed to the bottom of the case right up until it gets below the floppy. It can be a problem if you have a floppy in the upper half of the case, though.
Now I bought Asus M2N SLI. After ordering it, found out that one local store received KN9 SLIs. Damn, I prefer Abit since NF-7S. I also read there are numerous memory problems with the Asus board although it does seem to overclock like crazy. Still, if I get any problems, it goes back and I'm getting myself the Abit one. Actually I hope something goes wrong ;)
P.S. the Asus board also features some ADI audio codec instead of Realtek 882 or 883 HD standard ones. Currently it doesn't support EAX. I hope that doesn't mean 3d audio is not supported. I never use EAX anyway since in all games I tried it in, it skewed the sound somehow. America's Army sounded awful with EAX on Soundstorm and Creative Live. Perhaps if I got myself Audigy 2ZS, I might reconsider using it.