E6700 Lapped IHS = 2-7C cooler under load

Discussion about Intel CPUs and overclocking. Need help with that new Intel processor? Not sure which one is right for you? Like to void your warranty? This is the place for you! Please keep the topic on Intel Processors!
User avatar
kenc51
Legit Extremist
Legit Extremist
Posts: 5167
Joined: Thu Jun 23, 2005 1:56 pm
Location: Dublin, Republic of Ireland
Contact:

Post by kenc51 » Mon Oct 09, 2006 2:43 pm

use a piece of plastic and go slowly.
Solder is soft and shouldn't be too hard to remove.


Some say Acetone/nail varnish remover helps too

User avatar
Apoptosis
Site Admin
Site Admin
Posts: 33922
Joined: Sun Oct 05, 2003 8:45 pm
Location: St. Louis, Missouri
Contact:

Post by Apoptosis » Mon Oct 09, 2006 3:07 pm

tried the credit card trick, but didn't do much.

User avatar
kenc51
Legit Extremist
Legit Extremist
Posts: 5167
Joined: Thu Jun 23, 2005 1:56 pm
Location: Dublin, Republic of Ireland
Contact:

Post by kenc51 » Mon Oct 09, 2006 3:13 pm

Soldering Iron and a piece of paper?

Heat the solder till it runs and try put a bit of thin paper under it and lift it off....

With the tip of the iron you should be able to coax it onto the paper........just hold the paper on the edge if the core so the solder can fall onto it, if some falls onto the substrate....so what...there are no delicate chips on the top

I'm sure your have a soldering iron.....

User avatar
Apoptosis
Site Admin
Site Admin
Posts: 33922
Joined: Sun Oct 05, 2003 8:45 pm
Location: St. Louis, Missouri
Contact:

Post by Apoptosis » Mon Oct 09, 2006 4:49 pm

oh well it doesn't matter... this chip isn't coming back to life... LOL

User avatar
kenc51
Legit Extremist
Legit Extremist
Posts: 5167
Joined: Thu Jun 23, 2005 1:56 pm
Location: Dublin, Republic of Ireland
Contact:

Post by kenc51 » Mon Oct 09, 2006 4:50 pm

R.I.P

User avatar
dicecca112
Site Admin
Site Admin
Posts: 5012
Joined: Mon Mar 01, 2004 10:40 am
Contact:

Post by dicecca112 » Mon Oct 09, 2006 5:05 pm

Apop, next time just send it to me, and I'll destroy it. Via overclocking. The magic smoke has left another one
Image

User avatar
DMB2000uk
Site Admin
Site Admin
Posts: 7095
Joined: Mon Jul 18, 2005 5:36 pm
Location: UK

Post by DMB2000uk » Mon Oct 09, 2006 5:49 pm

Didnt the badaxe do that for nate with its super voltages?

I thought you'd tried that on a working core at first :P
Practice for when youre ready? :P

Dan
Image (<- Clickable)

User avatar
eva2000
Legit Extremist
Legit Extremist
Posts: 270
Joined: Fri Nov 07, 2003 1:12 am
Location: Brisbane, Australia
Contact:

Post by eva2000 » Tue Oct 10, 2006 11:06 am

Apoptosis wrote:Image

Couldn't let you one up me :evil:
nice lap.. but IHS removal you crazy bugger :mrgreen:

buggers
Legit User
Legit User
Posts: 10
Joined: Thu May 31, 2012 4:09 pm

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by buggers » Sat May 16, 2020 8:11 am

To be honest, I never tried to do it, but, nevertheless, you interested me, I just recently purchased Weller P2KC, which I already use almost as a pro, thanks to the site https://solderingironguide.com/reviews/weller-p2kc -review/ , which showed me the instructions, which gives you the opportunity to understand due to the fact that it is written in clear language and wine, which is for ordinary people to really explain. Thank you very much for that!

User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1254
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by DJ Tucker » Sun May 17, 2020 1:50 pm

did you really just resurrect a 14 year old post? of course you did well done. gold star :toimonster:
9600kf 4.8ghz (1.216v)|Z390 Asrock Phantom Gaming 6|16gb DDR4 Corsair Vengeance 2666mhz|RTX 2070 1950mhz (0.900v)|Corsair HX1000i|128gb Silicon Power NVME (OS)|2tb WD Blue M.2 SSD (Games)|Aqua Computer D5 Next Pump|Alphacool Eisblock XPX Aurora CPU Block|Watercool Heatkiller IV GPU Block|360+240mm Radiators|Vector VDM01

User avatar
KnightRid
Moderator
Moderator
Posts: 4010
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by KnightRid » Mon May 18, 2020 3:10 am

DJ Tucker wrote:
Sun May 17, 2020 1:50 pm
did you really just resurrect a 14 year old post? of course you did well done. gold star :toimonster:
I know right. I wish there would be a way to auto lock threads after a certain period of time and have it email a mod to allow the post or not before putting it up.

Nothing bad in the post, just useless after 14 years.
Cigar Blog I review for - http://www.stogiereview.com

Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:

User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1254
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by DJ Tucker » Mon May 18, 2020 1:10 pm

exactly what I was thinking knightrid. but unfortunately the forum has really gone down hill as of late. Apop puts a lot of the reviews on discord before on here and I don't mind that one bit but be nice to see the forums as active as they was back when I joined up until 2018 when everything went very quiet :(
9600kf 4.8ghz (1.216v)|Z390 Asrock Phantom Gaming 6|16gb DDR4 Corsair Vengeance 2666mhz|RTX 2070 1950mhz (0.900v)|Corsair HX1000i|128gb Silicon Power NVME (OS)|2tb WD Blue M.2 SSD (Games)|Aqua Computer D5 Next Pump|Alphacool Eisblock XPX Aurora CPU Block|Watercool Heatkiller IV GPU Block|360+240mm Radiators|Vector VDM01

User avatar
sbohdan
Legit Extremist
Legit Extremist
Posts: 1284
Joined: Sun Jul 17, 2005 9:33 am
Location: Canada
Contact:

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by sbohdan » Tue May 19, 2020 9:09 pm

still lurking here after 15 years :supz:
Main rig: NZXT Phantom modded case with Danger Den WC, MSI Tomahawk B350, Ryzen 1700X @ 3.4Ghz, 16GB Patriot Viper DDR4 3200Mhz 16-18-18-36, MSI GTX 1060 3GT OC, Asus 24" 1ms 144hz, Intel P7600 256Gb nvme PCiE, Samsung 2TB; PC P&C 750W, Win10 Pro 64
Laptop: Dell XPS 1530 (T9500; 4GB 800 RAM; 120GB Crucial SSD; 8600GT; WIN10 pro 64bit)
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=

User avatar
Kaos Kid
Legit Extremist
Legit Extremist
Posts: 961
Joined: Sat Mar 27, 2010 11:31 am
Location: 40 clicks West of the Gateway

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by Kaos Kid » Wed May 20, 2020 11:21 pm

Yep I still lurk too lol
I have come to the conclusion that "FaceBook" should be renamed "FacePalm" :roll:

owlaurapor
Legit Little One
Legit Little One
Posts: 2
Joined: Tue Jun 09, 2020 7:35 am

Re: E6700 Lapped IHS = 2-7C cooler under load

Post by owlaurapor » Tue Jun 09, 2020 7:37 am

Old school guys are here :supz:

Post Reply