New Card, Bad 3DMark Score
-
- Legit Fanatic
- Posts: 216
- Joined: Sat Jul 15, 2006 3:00 pm
New Card, Bad 3DMark Score
Booooo!!! I never expected a 7900GS to score this low. Looks about the same to what other people are getting with this card though.
http://www.newegg.com/Product/Product.a ... 6814150208
I haven't ever seen a review of a 450mhz 7900GS, but I expected more than this on stock settings. I'm sure with an overclock I can bring it up, but I need to spend another $30 to replace the stock cooler first. Should have bit the bullet and gotten that X1950Pro when it was on sale, it would have been more cost effective.
Last edited by cyberneticimplant on Mon Feb 05, 2007 10:00 pm, edited 1 time in total.
- dicecca112
- Site Admin
- Posts: 5014
- Joined: Mon Mar 01, 2004 10:40 am
- Contact:
Considering the GS is a bit slower than the GT, that score seems normal but it is a bit low but not by much.
http://www.guru3d.com/article/content/377/11/
7900GS Specs:
Core Speed - 450MHz
Memory Speed - 660MHz(1320MHz effective)
Fill Rate - 9000 MTexels/s
Vertex Shaders - 7
Pixel Shaders - 20
Memory Bandwidth - 42.20GB/s
7900GT Specs:
Core Speed - 450MHz
Memory Speed - 660MHz(1320MHz effective)
Fill Rate - 10800 MTexels/s
Vertex Shaders - 8
Pixel Shaders - 24
Memory Bandwidth - 42.20GB/s
The 7900GS has been known to be a good overclocker so you could try that.
http://www.guru3d.com/article/content/377/11/
7900GS Specs:
Core Speed - 450MHz
Memory Speed - 660MHz(1320MHz effective)
Fill Rate - 9000 MTexels/s
Vertex Shaders - 7
Pixel Shaders - 20
Memory Bandwidth - 42.20GB/s
7900GT Specs:
Core Speed - 450MHz
Memory Speed - 660MHz(1320MHz effective)
Fill Rate - 10800 MTexels/s
Vertex Shaders - 8
Pixel Shaders - 24
Memory Bandwidth - 42.20GB/s
The 7900GS has been known to be a good overclocker so you could try that.
There is no theory of evolution. Just a list of animals Chuck Norris allows to live.
-
- Legit Fanatic
- Posts: 216
- Joined: Sat Jul 15, 2006 3:00 pm
- dicecca112
- Site Admin
- Posts: 5014
- Joined: Mon Mar 01, 2004 10:40 am
- Contact: