Intel Releases D975XBX2 BIOS Update 2674 For Download

Discussion about Intel CPU Motherboards
Post Reply
vddobrev
Legit Aficionado
Legit Aficionado
Posts: 53
Joined: Tue Feb 27, 2007 3:23 pm

Intel Releases D975XBX2 BIOS Update 2674 For Download

Post by vddobrev »

New Fixes/Features:
ï‚· Fixed failures with the TCG ACPI Event Log when running the Vista
DTM TCG TPM BIOS Interface Test.
ï‚· Fixed issue where system would hang booting Windows XP with OEM
Activation 2.0 data programmed, EIST enabled, and certain
processor installed in the system.
ï‚· Modified IRQ table to evenly distribute IRQs for devices.
ï‚· Fixed priority issue in Advance Boot Mode when Legacy Floppy is
installed without a media.
User avatar
IRQ Conflict
Legit Extremist
Legit Extremist
Posts: 257
Joined: Thu Feb 15, 2007 10:26 pm

Post by IRQ Conflict »

Thx for the heads up vddobrev.

Now I hope this finally fixes the ps/2 issue(s).

Kudos to Intel for working so hard on fixing this BIOS.
-Rampage- Motherboard: Asus Rampage Formula CPU: Q6600 @ 3.2Ghz Cooling: OCZ Vendetta 2 Ram: 4GB OCZ Reaper HPC PC2-8500 5-5-5-15 @ 540Mhz Video Card: Sapphire Radeon HD 5870 Storage: Seagate Barracuda 7200.10 320GB/4x 500GB Barracuda 7200.11 Raid 0 Power Supply: PC P&C Silencer 750 Quad Case: Antec P180B Monitor: Syncmaster 245T OS: Vista 64bit
Image
User avatar
Apoptosis
Site Admin
Site Admin
Posts: 33941
Joined: Sun Oct 05, 2003 8:45 pm
Location: St. Louis, Missouri
Contact:

Post by Apoptosis »

Here is the linkto the download page to help find it quicker!
BIOS Version 2674
About This BIOS:
- March 15, 2007
- BX97520J.86A.2674.2007.0315.1546
- SATA RAID info:
- Intel(R) RAID for SATA - v5.6.2.1002
- Marvell 88SE6145 SATA BIOS – v1.1.0.34
- PXE UNDI: Initializing Intel(R) Boot Agent GE v1.2.28
- PXE Base Code: Intel(R) Boot Agent GE v1.2.42
- Intel® Active Management Technology info:
- Intel® AMT BX Firmware: v1.2.3

New Fixes/Features:
- Fixed failures with the TCG ACPI Event Log when running the Vista DTM TCG TPM BIOS Interface Test.
- Fixed issue where system would hang booting Windows XP with OEM Activation 2.0 data programmed, EIST enabled, and certain processor installed in the system.
- Modified IRQ table to evenly distribute IRQs for devices.
- Fixed priority issue in Advance Boot Mode when Legacy Floppy is installed without a media.
User avatar
Sparky
Legit Extremist
Legit Extremist
Posts: 727
Joined: Fri Feb 16, 2007 4:47 pm
Location: Huntington Beach, CA USA

Post by Sparky »

Downloaded it this morning, will update it tonight when I get home. Any feedback on how it works?
MSI Meg X570 Unify | Ryzen 3900X | Noctuna NH-U12A | G.Skill RipJaws DDR4 3600 16GB | Samsung 970 Pro 512GB M.2 NVMe | (2) WD Blue 3TB Backups | MSI 2060 Super Gaming X | Meshify - C | SB X-Fi
vddobrev
Legit Aficionado
Legit Aficionado
Posts: 53
Joined: Tue Feb 27, 2007 3:23 pm

Post by vddobrev »

Sparky wrote:Downloaded it this morning, will update it tonight when I get home. Any feedback on how it works?
I installed the BIOS last night, didn't notice any difference, but I am not having any issues to begin wiht.
Dandruff
Legit Fanatic
Legit Fanatic
Posts: 174
Joined: Fri Dec 29, 2006 11:25 pm

Post by Dandruff »

IRQ Conflict wrote:Now I hope this finally fixes the ps/2 issue(s).
nope. it doesn't.
User avatar
IRQ Conflict
Legit Extremist
Legit Extremist
Posts: 257
Joined: Thu Feb 15, 2007 10:26 pm

Post by IRQ Conflict »

Ugh, I wonder what # on the list of issues the PS/2 problem is? Does it even register on their radar? :roll:

So far they have fixed dozens of issues I'd never even heard about. What the heck is a "TCG"? :|
-Rampage- Motherboard: Asus Rampage Formula CPU: Q6600 @ 3.2Ghz Cooling: OCZ Vendetta 2 Ram: 4GB OCZ Reaper HPC PC2-8500 5-5-5-15 @ 540Mhz Video Card: Sapphire Radeon HD 5870 Storage: Seagate Barracuda 7200.10 320GB/4x 500GB Barracuda 7200.11 Raid 0 Power Supply: PC P&C Silencer 750 Quad Case: Antec P180B Monitor: Syncmaster 245T OS: Vista 64bit
Image
User avatar
Sparky
Legit Extremist
Legit Extremist
Posts: 727
Joined: Fri Feb 16, 2007 4:47 pm
Location: Huntington Beach, CA USA

Post by Sparky »

Just flashed mine and don't notice anything unusual (good thing). I've been fortunate as my mobo has been trouble free thus far.
MSI Meg X570 Unify | Ryzen 3900X | Noctuna NH-U12A | G.Skill RipJaws DDR4 3600 16GB | Samsung 970 Pro 512GB M.2 NVMe | (2) WD Blue 3TB Backups | MSI 2060 Super Gaming X | Meshify - C | SB X-Fi
User avatar
gara56
Legit Enthusiast
Legit Enthusiast
Posts: 46
Joined: Sat Feb 10, 2007 7:57 pm

Post by gara56 »

Sparky wrote:Just flashed mine and don't notice anything unusual (good thing). I've been fortunate as my mobo has been trouble free thus far.

What OS are you using?
Intel D975XBX V306 BIOS 1479; Intel E6600; 4GB Corsair TWIN2X2048-6400C4D; ATI X1900XTX w/512MB; 150GB Raptor 10k RPM SATA HD; Corsair HX620 PSU; Vista Ultimate X32; Logitech MX1000 cordless kb/mouse; Logitech Ultra Vision Quickcam; Lian Li PC-V1200B;Samsung 226BW monitor.
User avatar
Sparky
Legit Extremist
Legit Extremist
Posts: 727
Joined: Fri Feb 16, 2007 4:47 pm
Location: Huntington Beach, CA USA

Post by Sparky »

Windows XP Home w/SP2
MSI Meg X570 Unify | Ryzen 3900X | Noctuna NH-U12A | G.Skill RipJaws DDR4 3600 16GB | Samsung 970 Pro 512GB M.2 NVMe | (2) WD Blue 3TB Backups | MSI 2060 Super Gaming X | Meshify - C | SB X-Fi
SteveS
Legit User
Legit User
Posts: 21
Joined: Sat Feb 17, 2007 8:37 pm

Post by SteveS »

Once again I hoped to fix problems and I only get more. I have been having slow boot problems on a cold boot. I was hoping the new bios might help. I download and installed the new bios, and they seemed to install OK, the machine restarted after the install, I changed the bios setting to turn off the various ports and Marvell controller, it reboots again and the system seems to run OK.

This morning I cold boot the machine, get the Intel Flash screen, the codes in the lower right zip thru, the screen goes black, and then Nothing. Now what!

INTEL is you are listening, you really blew it on this one. You have offered no help through your support system and I am really fed up with the performance of this board.
bullet
Legit User
Legit User
Posts: 22
Joined: Wed Feb 14, 2007 10:55 am

Post by bullet »

I had a black screen on cold boot once too, but with bios 2663. But a simple restart (using CTRL+ALT+DEL worked!) fixed it. Never had it again yet. I guess it's just luck.
BlueMagic
Legit Enthusiast
Legit Enthusiast
Posts: 41
Joined: Wed Mar 14, 2007 11:46 am

Post by BlueMagic »

SteveS:

Is your D975XBX2 up and running ?
Intel D975XBX2
Xeon 3060 (E6600) at stock 2.4 GHz
Seagate 500 GB SATA on Intel Matrix black port 0
Plextor PX-755SA SATA DVD on Marvell blue port 5
USB keyboard and mouse
Windows XP/SP2
BIOS 2663, lastest drivers on LAN,Matrix,Marvell
Asus EN8800GTS PCI-E video card
SteveS
Legit User
Legit User
Posts: 21
Joined: Sat Feb 17, 2007 8:37 pm

Post by SteveS »

Ggot it to boot by wiggling the USB connector for the keyboard. It also seemed to boot quicker with the wiggle. Are there any reported issues with bad connections on the rear connector panel?
Post Reply