New Quad Core Monster!! **New case, New pics**

Dragon_Cooler · Post by **Dragon_Cooler** » Thu May 10, 2007 4:34 pm

Finally after months of saving I was finally able to build a new machine for me. For once I wanted to go all out and try and get the best of the best and see what it was like. LOL So far its bad assssssss!!!!

I bought all my parts from ZZF and newegg, whoever had the better deal at the time I bought from. Except for my processor, I did buy just barely used in mint condition from trusted person on another forum for $700 ( one heck of a deal!!!) In case you cant tell from the pics I got an ASUS Striker Extreme, 2GB Crucial Ballistix tracer pc-8500, and an Intel QX6700 cooled by a Zalman CNPS 9700 NT. SO FAR I FREAKING LOVE IT!!!! ok enough talk...pics
(side note, my 9700nt came in a late, so some of the pics are with the crappy stock cooler)

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2310.JPG[/img]

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2311.JPG[/img]

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2312.JPG[/img]

Test setup
[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2344.JPG[/img]

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2355.JPG[/img]

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2363.JPG[/img]

Fully built
[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2365.JPG[/img]

Can ya tell i am a sucker for LED's???
[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2367.JPG[/img]

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2368.JPG[/img]

[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2369.JPG[/img]

tadaaaaa!!!
[img]ftp://mulanserving.homeftp.net/New-comp/IMG_2380.JPG[/img]

To answer the dying question, yes i am going to overclock once i get all settled in. I have a lan party comming up, so i am going to run some ubar benchmarks and really put it to the test. So far, All at the same time i was able to run CS, install a game, surf the web without the system even think about what it was doing, and thats just puny for a system like this. LOL My next few upgrades will involve a sata dvd burner to get rid of all IDE, A new case....not sure what one yet, and possibly another 8800gts.

HONkUS · Post by **HONkUS** » Thu May 10, 2007 5:47 pm

holy crap dude that looks sweet in that case.

Post by **DMB2000uk** » Thu May 10, 2007 6:52 pm

Its rigs like that that make me jealous

Very very nice setup. Get a huge case window.

Dan

Dragon_Cooler · Post by **Dragon_Cooler** » Thu May 10, 2007 7:26 pm

yeah after serious heavy thinking, i am prob going to go with a lian li of sorts. LOL

Post by **DMB2000uk** » Thu May 10, 2007 7:56 pm

Seriously Ben, you need a better sig

Say one like this:

Dan

Post by **Apoptosis** » Thu May 10, 2007 8:12 pm

damn.... sweet rig and welcome to the wonders of quad-core!

bigblockmatt · Post by **bigblockmatt** » Thu May 10, 2007 9:58 pm

that is SWEET!!!

ibleet · Post by **ibleet** » Fri May 11, 2007 9:55 am

Awesome rig, congrats!

kenc51 · Post by **kenc51** » Fri May 11, 2007 10:20 am

Somebody must have got a pay rise

Sweet rig!

stopthekilling77 · Post by **stopthekilling77** » Fri May 11, 2007 11:11 am

what'd you have before the upgrade?

Dragon_Cooler · Post by **Dragon_Cooler** » Fri May 11, 2007 11:55 am

kenc51 wrote:Somebody must have got a pay rise

Sweet rig!

No pay raise, just load of saving

what'd you have before the upgrade?

AMD 3800 X2, Corsair XMS pro, DFI lanparty ultra, Pro 64 cooler.

Well i have made a small OC jump, upped the multiplier from 10 to 11 for 2.93ghz and it runs stable with the idle temps @

0 54
1 49
2 52
3 45

and load

0 70
1 63
2 70
3 62

which about right for this proc. Once i get a little more confident and get a new PSU, i will do some more

Dragon_Cooler · Post by **Dragon_Cooler** » Fri Jun 08, 2007 9:44 pm

I finally got the new case for the new build. After some serious thought, and i mean serious (weighing almost all the pros and cons) I decided to go with a brand that i use to turn my nose up at, Lian-Li. For the most part they are just......well, plain. This is also my first mid tower build. I normally like the room in my chassis.

This particular model, the PC-65 PLUS II, fit most all my necessities. Smaller, cable managment, a way to flash my Raptor X, and lightweight. Though it didnt fit everything I wanted it seemed to me the best fit what I was looking for. Though heavier than my previous THERMALTAKE SHARK, the size of it seems to make it a little easier to carry. I will try and get an informal review done on this case with the proper approval so i wont bore you with words, so for the time being...... PICS!!!

[img]ftp://mulanserving.homeftp.net/n_case/IMG_2670.JPG[/img]
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2671.JPG[/img]

[img]ftp://mulanserving.homeftp.net/n_case/IMG_2698.JPG[/img]

My room to hide cables for some decent cable managment
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2682.JPG[/img]
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2683.JPG[/img]
There is room under the hard drive cage to hide some cable

[img]ftp://mulanserving.homeftp.net/n_case/IMG_2689.JPG[/img]

Tight fit in some places
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2700.JPG[/img]
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2678.JPG[/img]

And of course the geek has to have their photo-shoot :D

[img]ftp://mulanserving.homeftp.net/n_case/IMG_2706.JPG[/img]
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2708.JPG[/img]
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2715.JPG[/img]
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2730.JPG[/img]

This is my favorite pic out of the hundreds i have....
[img]ftp://mulanserving.homeftp.net/n_case/IMG_2744.JPG[/img]

Some of the minor mods i had to make to the case and are going to make the case are, the rear exhaust fan was blowing into the case, had to turn that around to blow out. The Video card fan is currently blowing out and i will have to make a nuts and bolts mod to make that blow in, Cut out the side of the hard drive case for the raptor X, and change the LED on the front of the case to a different color (probably clear white) Also get rid of the IDE DVD burner for a sata dvd burner.

I have noticed in shopping for this case their really isnt a lot of "reviews" on this particular case if any, which is one reason i am posting this and also going to see if i can get an informal review going.

Zertz · Post by **Zertz** » Fri Jun 08, 2007 10:08 pm

Looks nice

Your favorite picture link is borken btw
Edit: Fixed now

maj0r_pawnage · Post by **maj0r_pawnage** » Fri Jun 08, 2007 10:29 pm

if you ever want to make a new comp ill gladly take that off your hands, ill even pay shipping :D

kenc51 · Post by **kenc51** » Sat Jun 09, 2007 7:06 am

Looking good

Remember Kentsfield only shines when under water

You know you want to.........take the "plunge" ;)

maj0r_pawnage · Post by **maj0r_pawnage** » Sat Jun 09, 2007 8:53 am

vapochill ftw

Sparky · Post by **Sparky** » Sat Jun 09, 2007 10:34 am

WOW! Beautiful set up.

BlakeStamps · Post by **BlakeStamps** » Sat Jun 09, 2007 12:22 pm

Excellent cable routing, the black looks nice, though I still love my silver Lian-Li!

Post by **DMB2000uk** » Sat Jun 09, 2007 7:39 pm

Very nice, a build to be envious of

Dan

Dragon_Cooler · Post by **Dragon_Cooler** » Sun Jun 10, 2007 11:14 am

THANKS!!!

Yeah this is just a start, when i get in and do all of the mods and get my SATA dvd burner cable routing will be better than what it is now

So far its a little louder than my SHARK, but thats to be expected with twice as many fans.

Legit Reviews

New Quad Core Monster!! New case, New pics

New Quad Core Monster!! New case, New pics