3.3 Voltage is off?
-
maj0r_pawnage
- Legit Extremist
- Posts: 408
- Joined: Sat Feb 17, 2007 7:16 pm
- Location: Toronto Ontario
3.3 Voltage is off?
well bio gives me a warning saying that my 3.3v is @ 2.96 and speed fan also gives me this same reading? should i be worried?
E6300 @ 3.51GHz 1.392v
Asus Maximus Formula
Antec 550Watt Psu
Mushkin DDR-1206@ 5-5-5-15 / 2.28v
Zalman CPU Cooler CNPS7700
6408800GTS(OC 691MHz Core/2.132GHz Mem)
2x80mm case fans +2x120mm case fans
Asus Maximus Formula
Antec 550Watt Psu
Mushkin DDR-1206@ 5-5-5-15 / 2.28v
Zalman CPU Cooler CNPS7700
6408800GTS(OC 691MHz Core/2.132GHz Mem)
2x80mm case fans +2x120mm case fans
Re: 3.3 Voltage is off?
That's just over 10% low which is outside the normal tolerance IF the numbers given are correct. since both progams numbers come from the same M/B sensor,maj0r_pawnage wrote:well bio gives me a warning saying that my 3.3v is @ 2.96 and speed fan also gives me this same reading? should i be worried?
1]the sensor could be wrong
2] the way the M/B reads the sensor could be wrong
I'd get a good multimeter and check the actual voltage.
also many M/B's/bios's have setting to adjust the onboard voltages, but again I'd want to use a MM to be sure I wasn't overvolting unnessesarily.