VGA cable

[kappage]

In my VGA cable i have these colors:

Thick Blue:
Thick Red:
Thick Grey:
Thin Orange(or red):
Thin Yellow:
Thin Black:
Thin Green:
Thin White:
Thin Brown:

Wikipedia: http://en.wikipedia.org/wiki/VGA_connector


on the inside of my Touch screen i have 10 things they can go with, which one could possibly go were, on the site below they give these directions

vga pinouts

format is PC gfx card to 4820

1 to 2 red video
2 to 4 green video
3 to 6 blue video
13 to 7 h sync
14 to 9 v sync
5 to 10 ground

may be needed if display little wobbly

6 to 1
7 to 3
8 to 5
all video grounds.

(edit)

RS232 for serial touch screen

2 to 2
3 to 3
5 to 5 gnd

And thats all, The main thing i need to know is Which one is what? here is a pic im pretty sure hes talking about soldering them to this. (below)

p1010009aj3.jpg (111.79 KiB) Viewed 2996 times

If anyone could shed some light on this please do so!

Thanks
Kappage

[Dragon_Cooler]

is this what you need??

http://www.bbdsoft.com/video.html

[kappage]

Yea thats one of the things i needed but what do i solder it to on the other side??? there are the different colors and then i need to solder them onto the ones circled in red.