Is this showing me pin one??
Is this showing me pin one??
Pretty simple is that dash on this picture below showing me pin one??
Main Rig: C2D 6850 @ 3.0Ghz, 2Gb DDR2667Mhz @ 833Mhz 5-5-5-15 Timings , XFX xXx 8600GTS @ 730/2260 , Gigabyte Ga-945GCM-S2L
JukeBox: Currently in an Upgrade but im too lazy to do it at the moment
I² keepin it real
JukeBox: Currently in an Upgrade but im too lazy to do it at the moment
I² keepin it real
-
Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: Is this showing me pin one??
what kind of port is that?
Serial ports have two rows and VGA ports have three... this one has four.... hummmm
Serial ports have two rows and VGA ports have three... this one has four.... hummmm
-
Dragon_Cooler
- Legit Extremist
- Posts: 2405
- Joined: Wed Oct 12, 2005 10:17 am
- Location: DFW Texas
- Contact:
Re: Is this showing me pin one??
that is showing ground, the outer shell and that part of the board is for the ground.
-
Dragon_Cooler
- Legit Extremist
- Posts: 2405
- Joined: Wed Oct 12, 2005 10:17 am
- Location: DFW Texas
- Contact:
Re: Is this showing me pin one??
its not intentional.DMB2000uk wrote:Im not even sure that mark is intentional!
Dan
AGAIN...
That will be the same for EVERY VGA CONNECTOR!
hope that helps
-
Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: Is this showing me pin one??
i don't think that picture is of a vga connector...
VGA connectors are usually 2-3 rows on the solder side and consist of 15 pins... His image has 14 pins and four rows
VGA connectors are usually 2-3 rows on the solder side and consist of 15 pins... His image has 14 pins and four rows
-
Dragon_Cooler
- Legit Extremist
- Posts: 2405
- Joined: Wed Oct 12, 2005 10:17 am
- Location: DFW Texas
- Contact:
Re: Is this showing me pin one??
Apoptosis wrote:i don't think that picture is of a vga connector...
VGA connectors are usually 2-3 rows on the solder side and consist of 15 pins... His image has 14 pins and four rows
HAHHAH good point!!
Re: Is this showing me pin one??
Yes, its not a VGA connector its on my touchscreen PCB and i need to solder some things to some of those pins. Ive been told its based around a RS232 cable and that i need a RS232 cable to get it going, i dont have a RS232 port om my motherboard but i have ordered a usb to RS232 adapter so im hoping i can use that to get it working.
Main Rig: C2D 6850 @ 3.0Ghz, 2Gb DDR2667Mhz @ 833Mhz 5-5-5-15 Timings , XFX xXx 8600GTS @ 730/2260 , Gigabyte Ga-945GCM-S2L
JukeBox: Currently in an Upgrade but im too lazy to do it at the moment
I² keepin it real
JukeBox: Currently in an Upgrade but im too lazy to do it at the moment
I² keepin it real
Re: Is this showing me pin one??
Pin one is the pin soldered to the square pad. The top silk screen on the top side should indicate which one it is but is likely covered up by the connector. You will need to identify the type of connector (looks like a 15 pin D-sub) but it might be proprietary connector, I only see 14 pins soldered through. It would be best if you showed a picture facing the connector to make it easier to identify. I do some circuit board design and prototyping.kappage wrote:Yes, its not a VGA connector its on my touchscreen PCB and i need to solder some things to some of those pins. Ive been told its based around a RS232 cable and that i need a RS232 cable to get it going, i dont have a RS232 port om my motherboard but i have ordered a usb to RS232 adapter so im hoping i can use that to get it working.