I would like to do some work with epoxy resin on my next computer mod. I have absolutely no exerience doing this type of thing. Can someone please help through what I need and how to do it? Thanks a ton.
- Creech
Help with Epoxy Resin
Re: Help with Epoxy Resin
The instructions on the packet would be a good place to start
Generally its as easy as mix both parts 1:1, usually best to mix it on some scrap plastic. Then depending on the surface type leave it to react a bit or straight apply it and hold the two pieces together while it dries.
Dan
Generally its as easy as mix both parts 1:1, usually best to mix it on some scrap plastic. Then depending on the surface type leave it to react a bit or straight apply it and hold the two pieces together while it dries.
Dan
Re: Help with Epoxy Resin
With epoxies, exact measuring, and through mixing are VERY important.
have everything ready to go, mask off anything you don't want epoxied (the stuff is sticky and easily gets everywhere ) plenty of fresh air is a good idea.
dust masks, eye protection for sanding is a must.
have everything ready to go, mask off anything you don't want epoxied (the stuff is sticky and easily gets everywhere ) plenty of fresh air is a good idea.
dust masks, eye protection for sanding is a must.
Re: Help with Epoxy Resin
Thanks for the info. I'm trying to find a little bit to test now, but I can't find any locally. Any recommendations on where the best place to get some online is? Thanks.
- Creech