OCZ PC3500 Platinum LE old BH-5 + DFI NF4 SLI-D

From general questions to the harder advanced user topics you will find them here!
Post Reply
User avatar
eva2000
Legit Extremist
Legit Extremist
Posts: 270
Joined: Fri Nov 07, 2003 1:12 am
Location: Brisbane, Australia
Contact:

OCZ PC3500 Platinum LE old BH-5 + DFI NF4 SLI-D

Post by eva2000 »

The old legendary original winbond BH-5 stuff in the form of OCZ PC3500 Plat LE flies even further on DFI NF4 SLI-D than when i had this exact same pair in Abit AI7 intel board @@250 2227 :)

how's 266mhz 2-2-2-6 1T 3.6v

System
3500+ CAA2C 0505 APMW water cooled
DFI NF4 SLI-D 310 official bios
1x eVGA 6800U PCI-E SLI
2x 512MB OCZ PC3500 Plat LE BH-5
Pioneer A05 Burner
80GB WD 800JB
580W Topower 686P6 35A/12v adjustable rail psu.


10x 266mhz 2-2-2-6 1T 3.6v
chipset = 1.7v
LDT = 1.4v
LDT 3x

1.525 + 10% = 1.6-1.62v

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 6
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 8
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3120
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Disabled
Skew = Increase
Skew Value = 255
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = Level 4
Max Async Latency = 7ns
Read Preamble Time = Auto
Idle Cycle Limit = Auto
Dynamic Counter = Auto
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = Disable(8burst)

@266mhz 2-2-2-6 1T 8-15-2212

Image

Image

Image

Image

Image

Image

:cool:
Last edited by eva2000 on Tue Apr 19, 2005 9:33 pm, edited 2 times in total.
User avatar
Apoptosis
Site Admin
Site Admin
Posts: 33941
Joined: Sun Oct 05, 2003 8:45 pm
Location: St. Louis, Missouri
Contact:

Post by Apoptosis »

rockin unbuffered scores. I'm working on something like what you've already done here!
User avatar
eva2000
Legit Extremist
Legit Extremist
Posts: 270
Joined: Fri Nov 07, 2003 1:12 am
Location: Brisbane, Australia
Contact:

Post by eva2000 »

Yeah DFI NF4 really does scream and hunger for BH5 :D
User avatar
infinitevalence
Legit Extremist
Legit Extremist
Posts: 2841
Joined: Sat Apr 24, 2004 12:40 pm
Location: Nashville, TN
Contact:

Post by infinitevalence »

Man your numbers are putting my bh5 to shame, it only wants to go up to 253fsb :( i could try more voltage but anything over 240 is more than i need atm. once i can get water on my winchester though... who knows i might need some more head room. btw very nice overclock for a newcastle got my winni beat by 60mhz
"Don't open that! It's an alien planet! Is there air? You don't know!"
User avatar
eva2000
Legit Extremist
Legit Extremist
Posts: 270
Joined: Fri Nov 07, 2003 1:12 am
Location: Brisbane, Australia
Contact:

Post by eva2000 »

thanks this is the highest this cpu could go for some slight benching

Image

Image

Image

Image

Image

Image

Image
User avatar
Apoptosis
Site Admin
Site Admin
Posts: 33941
Joined: Sun Oct 05, 2003 8:45 pm
Location: St. Louis, Missouri
Contact:

Post by Apoptosis »

Almost at the 8GB/Sec range... great scores indeed :prayer: Great job Eva!
User avatar
infinitevalence
Legit Extremist
Legit Extremist
Posts: 2841
Joined: Sat Apr 24, 2004 12:40 pm
Location: Nashville, TN
Contact:

Post by infinitevalence »

I cant belive im seeing a 2.9ghz Newcastle and looks like your just using watter. You my friend got a lucky peice of silicon there.
"Don't open that! It's an alien planet! Is there air? You don't know!"
Post Reply