Blank screen when using my GeForce 7300LE :(

Forum for all the nVidia video cards from the past, present and future!
Post Reply
acesolo
Legit Little One
Legit Little One
Posts: 1
Joined: Thu Sep 06, 2007 7:00 am

Blank screen when using my GeForce 7300LE :(

Post by acesolo »

Hi folks,i would appreciate any opinions u may have on my pc problem im about to explain,as im lost and a bit of beginer when it comes to fixing PC hardware ect :)

My monitor will not boot up with my video card in the PCI Express slot anymore.i have 4 slots,1 PCI Express and 3 PCI.i had 1 video card,my GEforce 7300LE slotted into the PCI E slot and nothing in the other 3.for the past month my monitor would turn off in the middle of playing warcraft.at first for a few seconds,then for good.however my pc was running fine,the sound of the game was carrying on as normal,it was the monitor that was blank.so i came to the conclusion the monitor was faulty,i proceeded to try my monitor on my friends PC...no problems,worked fine.i then dug out my old VGA rubbish graphics card from my old pc and slotted it into the lower PCI slot,plugged the monitor into it and so far,no problems atal with the monitor.so next i thought..'video card faulty'? i check the device manager and the card is 'working properly'.

i then uninstll the card and drivers and reslot it and windows recognises the card fine,shows up on device manager ect ect,i install the drivers newly,the old ones,then the new ones,and restart.again pc starts normally,but no picture on the monitor,just a 'no signal' sign and the light flashes green,then to orange.

im kinda on a tight budget just now so i cant afford to fork out money on new hardware if its not the problem...i dont wanna buy a new graphics card only to find its a new motherboard i need...

so just to sum up...

pc runs fine,but monitor will not turn on when used with the pci e slotted video card.
windows recognises the video card and says the device is 'working properly'.

is it something simple iv missed? something on BIOS? do i need to boot up the primary pci e slot 1st?

im just confused why i get no picture,everythig is secure,cables ect,monitor works fine with the old VGA card,i dont even get a generic low res picture with my geforce..:((

any help would be apprciated,thanks :))
User avatar
DMB2000uk
Site Admin
Site Admin
Posts: 7095
Joined: Mon Jul 18, 2005 5:36 pm
Location: UK

Re: Blank screen when using my GeForce 7300LE :(

Post by DMB2000uk »

Well even though windows might say that it is working properly it still could be broke.

I would have though it was a faulty graphics card rather than the motherboard, but for peace of mind for you, are you able to borrow a PCIe card to test with, or take your PCIe card and see if it does or doesn't work in someone elses computer.

Dan
Image (<- Clickable)
User avatar
smack323
Legit Extremist
Legit Extremist
Posts: 1275
Joined: Fri Dec 30, 2005 4:28 pm
Location: Waukesha, WI

Re: Blank screen when using my GeForce 7300LE :(

Post by smack323 »

I agree with DMB2000uk..

1st- try to use that card in another computer.. or another card in your computer. this should tell you what the problem is your mother board or your card..
2nd- this might sound stupid (but i've done it so i mention it) make sure your monitor is hooked up to your pci-e card not the onboard video output...
3rd- check your bios settings if you can and be sure to turn off the on board video- thsi usally doesnt need to be done but ya never know.
4th- be sure to go to the Nvidia website and get the newest drivers for your card.

you said it did work but would cut out once in awhile - kinda sounds like it my have been overheating - you might have fried something in the card...

let us know if these suggestions help at all.
Core i5-6500 - Corsair Vengence 16GB DDR4 2133 - MSI 2080Ti - Antec 750W - Crucial 525GB SSD - Windows 10 64bit - ASUS 32" LED
Post Reply