Antec??

Discuss cases, PSUs, and various cooling techniques in here.
Post Reply
User avatar
Merlin
Legit Extremist
Legit Extremist
Posts: 898
Joined: Sat May 08, 2004 4:03 pm
Location: Dallas Texas

Antec??

Post by Merlin »

So I am now checking on Power supplies to get and I read a review on NewEgg that antec had changed where they purchased some of their capaciters thus making their PSU no longer any good. Does anyone know if this is true? I was under the impression the antec was the best all around brand to get. If its not what should I get so that I don't have to get another one whenm I upgrade to SLI or somthing else?
Merlin
Windows 10 64 bit home on both
ASUS Z97-A LGA1150|i7 4790K|32Gb G-skill Ripjaws DDR3 2400| EVGA GTX660 | Corsair HX520W PSU
ASUS ROG MAXIMUS X HERO 1151|i7 8700K|32Gb G-skill Ripjaws DDR4-2666| EVGA GTX1080 | Samsung 500GB SSD | Corsair AX760 PSU
User avatar
kenc51
Legit Extremist
Legit Extremist
Posts: 5167
Joined: Thu Jun 23, 2005 1:56 pm
Location: Dublin, Republic of Ireland
Contact:

Post by kenc51 »

Don't worry.....Antec are fine! They might not be the best, but they are quality power supplies that work. You shouldn't have any problems with them. Just make sure you get one with enough wattage.
FSP Group also make some very good PSU's that are cheap'ish and work very well. Both are very reliable!
User avatar
Merlin
Legit Extremist
Legit Extremist
Posts: 898
Joined: Sat May 08, 2004 4:03 pm
Location: Dallas Texas

Post by Merlin »

Thank you. Right now I have a DFI Ultra-d which does not support SLI but I plan to go SLI in the next year or so. How much wattage should I get to make fairly sure my PSU won't need upgrading when I go SLI?? 500W?
Merlin
Windows 10 64 bit home on both
ASUS Z97-A LGA1150|i7 4790K|32Gb G-skill Ripjaws DDR3 2400| EVGA GTX660 | Corsair HX520W PSU
ASUS ROG MAXIMUS X HERO 1151|i7 8700K|32Gb G-skill Ripjaws DDR4-2666| EVGA GTX1080 | Samsung 500GB SSD | Corsair AX760 PSU
User avatar
kenc51
Legit Extremist
Legit Extremist
Posts: 5167
Joined: Thu Jun 23, 2005 1:56 pm
Location: Dublin, Republic of Ireland
Contact:

Post by kenc51 »

Merlin wrote:Thank you. Right now I have a DFI Ultra-d which does not support SLI but I plan to go SLI in the next year or so. How much wattage should I get to make fairly sure my PSU won't need upgrading when I go SLI?? 500W?
Depends on what GFX / CPU your going to go with! 500W should be your min!
You should always get a bit more Wattage than required because a PSU becomes less efficient over time! A 500W should be fine unless your thinking of getting two 8800GTX cards
User avatar
Merlin
Legit Extremist
Legit Extremist
Posts: 898
Joined: Sat May 08, 2004 4:03 pm
Location: Dallas Texas

Post by Merlin »

What do you think of these choices?
http://www.newegg.com/Product/Product.a ... 6817194003
Merlin
Windows 10 64 bit home on both
ASUS Z97-A LGA1150|i7 4790K|32Gb G-skill Ripjaws DDR3 2400| EVGA GTX660 | Corsair HX520W PSU
ASUS ROG MAXIMUS X HERO 1151|i7 8700K|32Gb G-skill Ripjaws DDR4-2666| EVGA GTX1080 | Samsung 500GB SSD | Corsair AX760 PSU
Post Reply